DC/DC Converter for converting 24 VDC to 18 VDC with an output current of 0.4 A.
Product Model288-895
Product ID50347
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureEfficient voltage conversion from 24 VDC to 18 VDC
2
FeatureOutput current of 0.4 A
3
FeatureCompatible with 2.50 mm² wire cross section
4
FeatureReliable performance for various industrial applications
5
FeatureHigh-quality product from WAGO Corporation
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
According to the DALI specification, DALI ECGs have only basic isolation from the power supply. The DC/DC converter (288-895) does not offer any additional protective measures against the power supply, i.e., the input voltage cannot be regarded as SELV. Supplying the DC/DC converter (288-895) from a separate power supply unit is recommended and the necessary protections against contact must be observed.
Isolation voltage (AC)
AC 0.9 kV
Pollution degree
2
Short-circuit-protected
Yes
Series operation
No
Connection technology
CAGE CLAMP®
WAGO connector
WAGO 256 Series
Solid conductor
0.08 … 2.5 mm2 / 28 12 AWG
Fine-stranded conductor
0.08 … 2.5 mm2 / 28 12 AWG
Strip length
5 6 mm / 0.2 0.24 inches
Note (conductor cross-section)
12 AWG: THHN, THWN
Width
50 mm / 1.969 inches
Height
85 mm / 3.346 inches
Depth from upper-edge of DIN-rail
25 mm / 0.984 inches
Housing design
Mounting carrier
Mounting type
DIN-35 rail
Fire load
2.499MJ
Weight
73.4g
Ambient temperature (operation)
-25 … +70 °C
Ambient temperature (storage)
-40 … +80 °C
Relative humidity
85% (non-condensing)
Operating altitude (max.)
2000m
Conformity marking
CE
EMC immunity to interference
per EN 61000-6-2* *only in connection with 750-641 DALI/DSI Master Module
EMC emission of interference
per EN 61000-6-3*, *only in connection with 750-641 DALI/DSI Master Module
