WAGO 890-1105 is a 5-pole WINSTA® MINI female connector/socket with 1.50 mm² nominal cross section and Cod. I coding, offering fast and secure connections.
Product Model890-1105
Product ID49834
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureFast and Secure Connections
2
FeatureProtection Against Mismating
3
FeatureCompact Design
4
FeatureDurable Construction
5
FeatureEasy Installation
6
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Clamping units
5
Total number of potentials
5
Pin spacing
4.4 mm / 0.173 inches
Width
23.6 mm / 0.929 inches
Height
11.7 mm / 0.461 inches
Depth
34.1 mm / 1.343 inches
FeatureFast and Secure Connections
7
FeatureProtection Against Mismating
8
FeatureCompact Design
9
FeatureDurable Construction
10
FeatureEasy Installation
Use
DALI, Lighting Management
Coding
I
Variable coding
No
Marking
N ⏚ L - +
Potential Marking
N ⏚ L - +
Mating force of a plug-in connection
approx. 20 70 N (depending on pole number)
Retention force of a plug-in connection
Locked: > 80 N
Unmating force of a plug-in connection
Unlocked: approx. 20 70 N (depending on pole number)
Number of mating cycles
200, without resistive load
Protection type
IP20; IP40 with strain relief housing
Contact type (pluggable connector)
Female connector/socket
Connector (connection type)
for conductor
Mismating protection
Yes
Note on mismating protection
All WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180c.) plugging while laterally staggeredd.) plugging one pole
Locking lever
Can be retrofitted
Locking of plug-in connection
locking lever
Note on locking system
All connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).
Note (material data)
Information on material specifications can be found here
Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 5 A and voltages up to 600 V. For further information, please contact your local sales office.
