WAGO 890-244 is a 4-pole socket with Cod. B coding, designed for 1.50 mm² conductors. Ideal for secure and reliable connections.
Product Model890-244
Product ID49829
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureReliable and secure connections with Cod. B coding
2
FeatureSuitable for 1.50 mm² conductors
3
FeatureDurable and high-quality construction
4
FeatureEasy to install and maintain
5
FeatureCompact design with a width of 19.2 mm / 0.756 inches
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Variants:
Other pole markings
Clamping units
4
Total number of potentials
4
Pin spacing
4.4 mm / 0.173 inches
Width
19.2 mm / 0.756 inches
Height
11.7 mm / 0.461 inches
Depth
34.1 mm / 1.343 inches
Use
Control technology
Coding
B
Variable coding
No
Marking
1 2 3 4
Potential Marking
1 2 3 4
Mating force of a plug-in connection
approx. 20 70 N (depending on pole number)
Retention force of a plug-in connection
Locked: > 80 N
Unmating force of a plug-in connection
Unlocked: approx. 20 70 N (depending on pole number)
Number of mating cycles
200, without resistive load
Protection type
IP20; IP40 with strain relief housing
Contact type (pluggable connector)
Female connector/socket
Connector (connection type)
for conductor
Mismating protection
Yes
Note on mismating protection
All WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180c.) plugging while laterally staggeredd.) plugging one pole
Locking lever
Can be retrofitted
Locking of plug-in connection
locking lever
Note on locking system
All connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).
Note (material data)
Information on material specifications can be found here
Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 5 A and voltages up to 600 V. For further information, please contact your local sales office.
