3-conductor terminal block for PNP high-side sensors, featuring a yellow LED and pluggable signal level.
Product Model2020-5311/1102-950
Product ID48996
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureDesigned for PNP high-side switching sensors
2
FeatureFeatures a yellow LED for status indication
3
FeaturePluggable signal level for flexibility
4
FeaturePush-in CAGE CLAMP® connection technology for easy wiring
5
FeatureCompatible with 1 mm² wire size
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Note
According to EN 61984, pluggable connectors without a current interrupting capacity must not be mated or unmated when live or under load. An appropriate end plate must be applied to the carrier terminal blocks after each female plug.
Clamping units
6
Female plug slots
2
Total number of potentials
4
Number of levels
3
Number of jumper slots
3
Width
7 mm / 0.276 inches
Height
81.1 mm / 3.193 inches
Depth from upper-edge of DIN-rail
52.4 mm / 2.063 inches
Mounting type
DIN-35 rail
Marking level
Center/side marking
Note (material data)
Information on material specifications can be found here
Color
gray
Material group
I
Insulation material (main housing)
Polyamide (PA66)
Flammability class per UL94
V0
Fire load
0.358MJ
Weight
16.8g
Processing temperature
-35 … +85 °C
Continuous operating temperature
-60 … +105 °C
eCl@ss 10.0
27-14-11-28
eCl@ss 9.0
27-14-11-28
ETIM 9.0
EC000900
ETIM 8.0
EC000900
ECCN
NO US CLASSIFICATION
PU (SPU)
50 pcs
Packaging type
Box
Country of origin
DE
GTIN
4055143523516
Customs tariff number
85369010000
RoHS Compliance Status
Compliant,No Exemption
Ratings per
IEC/EN 60947-7-1
Rated current
13.5A
Approvals per
CSA 22.2 No 158
Rated voltage UL (Use Group B)
24V
Rated current UL (Use Group B)
15A
Rated voltage UL (Use Group D)
300V
Rated current UL (Use Group D)
15A
Rated voltage CSA (Use Group C)
24V
Rated current CSA (Use Group C)
10A
Power loss, per pole (potential)
0.434W
Rated current IN for specified power loss
13.5A
Resistance value for specified, current-dependent power loss
0.002Ω
Voltage type 1
DC
Nominal voltage
24V
LED schaltend f眉r
PNP
Connection technology
Push-in CAGE CLAMP®
Actuation type
Operating tool
Connectable conductor materials
Copper
Nominal cross-section
1 mm2
Solid conductor
0.14 1.5 m㎡/ 24 16 AWG
Solid conductor; push-in termination
0.5 1.5 m㎡/ 20 16 AWG
Fine-stranded conductor
0.14 1.5 m㎡/ 24 16 AWG
Fine-stranded conductor; with insulated ferrule
0.14 0.75 m㎡/ 24 18 AWG
Fine-stranded conductor; with ferrule; push-in termination
0.5 0.75 m㎡/ 20 18 AWG
Note (conductor cross-section)
Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
