3-conductor terminal block for PNP high-side switching actuators, featuring ground contact and push-in CAGE CLAMP connections.
Product Model2020-5317/102-000
Product ID48988
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureDesigned for PNP high-side switching actuators
2
FeatureFeatures ground contact for enhanced safety
3
FeaturePush-in CAGE CLAMP connections for easy wiring
4
FeatureSupports wire sizes from 0.14 mm² to 1.5 mm² (#24 AWG to #16 AWG)
5
FeatureRated for up to 13.5 A current and mounts on DIN-35 rail
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Note
According to EN 61984, pluggable connectors without a current interrupting capacity must not be mated or unmated when live or under load. An appropriate end plate must be applied to the carrier terminal blocks after each female plug.
Clamping units
6
Female plug slots
2
Total number of potentials
4
Number of levels
3
Number of jumper slots
6
FeatureDesigned for PNP high-side switching actuators
7
FeatureFeatures ground contact for enhanced safety
8
FeaturePush-in CAGE CLAMP connections for easy wiring
9
FeatureSupports wire sizes from 0.14 mm² to 1.5 mm² (#24 AWG to #16 AWG)
10
FeatureRated for up to 13.5 A current and mounts on DIN-35 rail
4
Width
7 mm / 0.276 inches
Height
81.1 mm / 3.193 inches
Depth from upper-edge of DIN-rail
52.4 mm / 2.063 inches
Mounting type
DIN-35 rail
Marking level
Center/side marking
Note (material data)
Information on material specifications can be found here
