3-conductor terminal block for PNP (high-side) switching actuators with ground contact, Push-in CAGE CLAMP connections, and DIN-35 rail mounting.
Product Model2020-5377/102-000
Product ID48981
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureDesigned for PNP (high-side) switching actuators with ground contact
2
FeatureFeatures Push-in CAGE CLAMP spring connections for easy wire insertion
3
FeatureSuitable for DIN-35 rail mounting with a width of 7mm
4
FeatureSupports wire sizes ranging from #24AWG to #16AWG (0.14 mm² to 1.5 mm²)
5
FeatureRated for a current of 13.5A and made from durable Polyamide 66 (PA 66) material
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Note
According to EN 61984, pluggable connectors without a current interrupting capacity must not be mated or unmated when live or under load. An appropriate end plate must be applied to the carrier terminal blocks after each female plug.
Clamping units
6
Female plug slots
2
Total number of potentials
4
Number of levels
3
Number of jumper slots
3
Width
7 mm / 0.276 inches
Height
81.1 mm / 3.193 inches
Depth from upper-edge of DIN-rail
52.4 mm / 2.063 inches
Mounting type
DIN-35 rail
Marking level
Center/side marking
Note (material data)
Information on material specifications can be found here
