281-623

Information on material specifications can be found here

I

V0

19.5g

-60 … +105 °C

27-14-11-16

EC000899

NO US CLASSIFICATION

box

4045454620684

Compliant,No Exemption

800V

10A

(III / 3) ≙ Overvoltage category III / Pollution degree 3

When selecting glass cartridge fuses, make sure that the maximum power loss listed below is not exceeded. The power loss is determined according to IEC or EN?60947-7-3/VDE 0611-6 at 23°C. The temperature rise of the terminal block must be checked according to their application and mounting. Higher ambient temperatures represent an additional impact on miniature fuses. Therefore, in such applications, the rated current must be reduced if necessary. More details are available from the manufacturers.

1.6W

2.5W

Cylindrical fuse; ?" x 1?"

Operating tool

Terminating Aluminum ConductorsWAGO Spring-Clamp Terminal Blocks are suitable for solid aluminum conductors up to 4 mm2/12 AWG if WAGO 鈥淎lu-PlusContact Paste249-130is used for termination.鈥淎lu-PlusContact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP®Spring Pressure Connection Technology,aluminum conductors must first be cleaned with a bladeand then immediately inserted into the clamping units filled with 鈥淎lu-Pluscontact paste.It is also possible to apply WAGO 鈥淎lu-Plus鈥漚dditionallyon the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm2 = 16 A4 mm2 = 22 A

0.08 4 m㎡/ 28 12 AWG