Compact SMD PCB terminal block with 0.75 mm² cross-section, 6 mm pin spacing, and PUSH WIRE® connection technology.
Product Model2065-101/998-403
Product ID48856
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureCompact Design
2
FeaturePUSH WIRE® Technology
3
FeatureHigh Reliability
4
FeatureTape-and-Reel Packaging
5
FeatureSingle-Pole Configuration
6
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
Notice:Terminal block without insulation housing! Protection against accidental contact must be provided at voltages higher than low voltages (e.g., SELV/PELV) for the relevant application.
Note
The ratings are based on an example pin spacing of 6 mm.The layout must meet the requirements of the insulation coordination standard EN/IEC 60664-1 and applicable end product standards.
Clamping units
1
Total number of potentials
1
Number of connection types
1
FeatureCompact Design
7
FeaturePUSH WIRE® Technology
8
FeatureHigh Reliability
9
FeatureTape-and-Reel Packaging
10
FeatureSingle-Pole Configuration
Number of levels
1
Pin spacing
6 mm / 0.236 inches
Width
2.3 mm / 0.091 inches
Height
2.7 mm / 0.106 inches
Depth
8 mm / 0.315 inches
Reel diameter of tape-and-reel packaging
330mm
Tape width
16mm
PCB contact
SMD
Solder pin arrangement
Over the entire terminal strip (in-line)
Number of solder pins per potential
1
Note (material data)
Information on material specifications can be found here
