The 857-531 JUMPFLEX signal conditioner by WAGO offers analog input, changeover relay output, and PC configuration.
Product Model857-531
Product ID48637
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureConfigurable threshold value switch
2
FeatureAnalog input with changeover relay output
3
FeaturePC configuration interface for easy setup
4
FeatureCalibrated measurement range switching
5
FeatureDurable and reliable design for industrial applications
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
Input and digital output must be safely isolated from any hazardous live parts!
Note
Use shielded signal lines!Only use shielded signal lines for analog input and output signals.Only then can you ensure that the accuracy and interference immunity specified for the device can be achieved, even in the presence of interference acting on the signal cable.Additional setting options via WAGO Interface Configuration Software or WAGO Interface Configuration App
Rated voltage
300V
Protection type
IP20
Connection technology
Push-in CAGE CLAMP®
Solid conductor
0.08 … 2.5 mm2 / 28 14 AWG
Fine-stranded conductor
0.34 2.5 m㎡/ 22 14 AWG
Strip length
9 10 mm / 0.35 0.39 inches
Width
6 mm / 0.236 inches
Height
94 mm / 3.701 inches
Depth from upper-edge of DIN-rail
97.8 mm / 3.85 inches
Mounting type
DIN-35 rail
Insulation material (main housing)
Polyamide (PA66)
Flammability class per UL94
V0
Fire load
0.013MJ
Weight
38.6g
Ambient temperature (operation)
-25 … +70 °C
Ambient temperature (storage)
-40 … 85 °C
Temperature range of connection cable
≤ (Tambient+ 35 K)
Relative humidity
5 85 % (no condensation permissible)
Operating altitude (max.)
2000m
Conformity marking
CE
EMC immunity to interference
EN 61000-6-2; EN 61131-2; EN 61326-1; EN 50121-3-2
EMC emission of interference
EN 61000-6-4; EN 61131-2; EN 61326-1; EN 50121-3-2
