Feature3-pole terminal block header with 2.5mm pin spacing
2
FeatureStraight solder pins for easy PCB mounting
3
Feature100% protected against mismating
4
FeatureLight gray color for easy identification
5
FeatureRated for 4 A current
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Total number of potentials
3
Number of connection types
1
Number of levels
1
Pin spacing
2.5 mm / 0.098 inches
Width
10 mm / 0.394 inches
Height
13.5 mm / 0.531 inches
Height from the surface
8.9 mm / 0.35 inches
Depth
7.8 mm / 0.307 inches
Solder pin length
4.6mm
Solder pin dimensions
0.8 x 0.8 mm
Drilled hole diameter with tolerance
1.1(+0.1)mm
Variable coding
Yes
Anti-rotation protection
Yes
Contact type (pluggable connector)
Male header
Connector (connection type)
for PCB
Mismating protection
Yes
Plugging without loss of pin spacing
No
Mating direction to the PCB
90°
PCB contact
THT
Solder pin arrangement
over the entire male connector (in-line)
Number of solder pins per potential
1
Note (material data)
Information on material specifications can be found here
