Intelligent 1-channel DC drive controller for 24VDC motors up to 5A with incremental position feedback and short-circuit protection.
Product Model750-636/025-000
Product ID47446
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureHigh-precision motor control with incremental position feedback
2
FeatureSupports 24VDC motors up to 5A with short-circuit protection
3
FeatureCompact design with DIN-35 rail mounting
4
FeatureRobust construction with IP20 protection and vibration resistance
5
FeatureEfficient operation with low power consumption and high reliability
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Number of digital inputs
3
Number of outputs
1 (A+; A-; H-bridge output)
Encoder connection
A, B, zero low-side switching; 5 24 VDC / open collector
Motor connection
A+, A-, H-bridge output; short-circuit-protected
Quadrature decoder
1x, 2x, 4x evaluation
Input characteristic
Type 1
Input current at specific input voltage
-3.2 mA At?0.3 V
Input current at specific input voltage (2)
0 mA bei 5 V
Input current (typ.)
2.7 mA at 24 V
Output current (max.) (motor)
5 A (15 A / 500 ms), short-circuit-protected
Voltage range for signal (0)
?3 +1.5 VDC
Voltage range for signal (1)
2.4 30 VDC
PWM frequency (typ.)
20kHz
Data width
32-bit set/actual value; 16-bit control or status
Limit frequency
50kHz
Supply voltage (system)
5 VDC; Via data contacts
Current consumption (5 V system supply)
55mA
Supply voltage (field)
24 VDC (-15 +20 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
Current consumption, field supply (module with no external load)
12mA
Isolation
500 V system/field
Indicators
LED (A-D) green: End Position +, End Position -, Preset, 24 V OK; LED (E, F) yellow: PWM Current Limitation, Position OK; LED (G, H) red: Reserved, Operating Fault
Number of incoming power jumper contacts
2
Number of outgoing power jumper contacts
2
Connection technology: inputs / outputs
8 x CAGE CLAMP®
Connection type 1
Inputs/Outputs
Solid conductor
0.08 … 2.5 mm2 / 28 14 AWG
Fine-stranded conductor
0.08 … 2.5 mm2 / 28 14 AWG
Strip length
8 9 mm / 0.31 0.35 inches
Width
12 mm / 0.472 inches
Height
100 mm / 3.937 inches
Depth
67.8 mm / 2.669 inches
Depth from upper-edge of DIN-rail
60.6 mm / 2.386 inches
Mounting type
DIN-35 rail
Housing material
Polycarbonate; polyamide 6.6
Fire load
0.965MJ
Weight
54.5g
Conformity marking
CE
Ambient temperature (operation)
-20 … +60 °C
Ambient temperature (storage)
-40 … 85 °C
Protection type
IP20
Pollution degree
2 per IEC 61131-2
Operating altitude
0 2000 m / 0 6562 ft
Mounting position
Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)
95%
Relative humidity (with condensation)
Short-term condensation per Class 3K6/IEC EN 60721-3-3 and E-DIN 40046-721-3, accounting for a temperature range of ?20 ?to +60 °C (except for wind-driven precipitation, water and ice formation)
Vibration resistance
per IEC 60068-2-6
Shock resistance
15g per IEC 60068-2-27
EMC immunity to interference
per EN 61000-6-2
EMC emission of interference
per EN 61000-6-3
Exposure to pollutants
Per IEC 60068-2-42 and IEC 60068-2-43
Permissible pollutant concentration H2S at a relative humidity < 75%
10ppm
Permissible pollutant concentration SO 2 at a relative humidity < 75%
