Angled THT male header with 5 poles, 7.62 mm pin spacing, and 100% mismating protection.
Product Model831-3645
Product ID46830
Stock on Request
Last updated: 8/29/2026
Key Features
1
Feature100% protected against mismating for reliable connections
2
FeatureAngled design for easy installation and access
3
Feature5-pole configuration with 7.62 mm pin spacing
4
FeatureRated for 600 V and 5 A CSA (Use Group D)
5
FeatureDurable construction with Polyamide (PA66) insulation and electrolytic copper contacts
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Total number of potentials
5
Number of connection types
1
Number of levels
1
Pin spacing
7.62 mm / 0.3 inches
Solder pin length
4mm
Solder pin dimensions
1 x 1.2 mm
Drilled hole diameter with tolerance
1.7(+0.1)mm
Variable coding
Yes
Anti-rotation protection
Yes
Contact type (pluggable connector)
Male header
Connector (connection type)
for PCB
Mismating protection
Yes
Plugging without loss of pin spacing
No
Mating direction to the PCB
180°
Locking of plug-in connection
none
PCB contact
THT
Solder pin arrangement
over the entire male connector (in-line)
Number of solder pins per potential
3
Note (material data)
Information on material specifications can be found here
