The WAGO 233-109 is a 9-pole PCB terminal block with a 0.5 mm² cross-section and 2.5 mm pin spacing. It uses CAGE CLAMP technology for secure connections.
Product Model233-109
Product ID46266
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureHigh-quality CAGE CLAMP technology for reliable connections
2
FeatureCompact design with 2.5 mm pin spacing
3
FeatureSuitable for 0.5 mm² wire cross-section
4
Feature9-pole configuration for multiple connections
5
FeatureDurable gray housing
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Variants:
Other pole numbers
Clamping units
9
Total number of potentials
9
Number of connection types
1
Number of levels
1
Pin spacing
2.5 mm / 0.098 inches
Width
24.8 mm / 0.976 inches
Height
15.7 mm / 0.618 inches
Height from the surface
11.7 mm / 0.461 inches
Depth
12.1 mm / 0.476 inches
Solder pin length
4mm
Solder pin dimensions
0.5 x 0.75 mm
Drilled hole diameter with tolerance
1.1(+0.1)mm
PCB contact
THT
Solder pin arrangement
over the entire terminal strip (in-line)
Number of solder pins per potential
2
Note (material data)
Information on material specifications can be found here
Terminating 0.75 mm2/18 AWG conductors is possible; however insulation diameter allows only every other clamping unit to be terminated with this conductor size.
