FeatureReliable CAGE CLAMP® connection technology for secure connections.
2
FeatureSuitable for DIN-35 rail and panel mounting.
3
FeatureNominal cross-section of 2.5 mm² for efficient current transfer.
4
FeatureSnap-in mounting feet for easy installation.
5
FeatureDurable construction with a weight of 21.4 g.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Clamping units
12
Total number of potentials
12
Number of connection types
1
Number of levels
1
Pin spacing
7.5 mm / 0.295 inches
Width
90.7 mm / 3.571 inches
Height
18.8 mm / 0.74 inches
Height from the surface
14.3 mm / 0.563 inches
Depth
27.5 mm / 1.083 inches
Drilled hole diameter for snap-in mounting foot with tolerance
3.5(+0.1)mm
Variable coding
Yes
Housing sheet thickness
0.6 1.2 mm / 0.024 0.047 inches
Mounting type
Panel mounting
Anti-rotation protection
Yes
Contact type (pluggable connector)
Male connector/plug
Connector (connection type)
for conductor
Mismating protection
No
Plugging without loss of pin spacing
No
Locking of plug-in connection
none
Note (material data)
Information on material specifications can be found here
