THT male header; 1.0 x 1.2 mm solder pin; angled; 100% protected against mismating; Threaded flange; Pin spacing 7.62 mm; 8-pole; light gray.
Product Model831-3628
Product ID45773
Stock on Request
Last updated: 8/29/2026
Key Features
1
Feature100% protected against mismating to ensure reliable connections.
2
FeatureThreaded flange for secure locking of the plug in the connection.
3
FeatureThree solder pins per pole provide high electrical and mechanical stability.
4
FeatureAngled solder pins allow for horizontal or vertical mounting on PCBs.
5
FeatureCompliant with various standards including UL 1059, IEC/EN 60664-1, and DEKRA certifications.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Total number of potentials
8
Number of connection types
1
Number of levels
1
Pin spacing
7.62 mm / 0.3 inches
Width
63.84 mm / 2.513 inches
Height
18.8 mm / 0.74 inches
Height from the surface
14.8 mm / 0.583 inches
Depth
29 mm / 1.142 inches
Solder pin length
4mm
Solder pin dimensions
1 x 1.2 mm
Drilled hole diameter with tolerance
1.7(+0.1)mm
Variable coding
Yes
Anti-rotation protection
Yes
Contact type (pluggable connector)
Male header
Connector (connection type)
for PCB
Mismating protection
Yes
Plugging without loss of pin spacing
No
Mating direction to the PCB
0°
Locking of plug-in connection
none
PCB contact
THT
Solder pin arrangement
over the entire male connector (in-line)
Number of solder pins per potential
3
Note (material data)
Information on material specifications can be found here
