WAGO 770-1324 4-pole socket with Cod. Q coding, 4.00 mm² cross-section, and green color. Ideal for secure connections in industrial settings.
Product Model770-1324
Product ID45075
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureReliable 4-pole connection with Cod. Q coding for secure and easy installation.
2
FeatureSuitable for 4.00 mm² cross-section wires.
3
FeatureDurable green housing for clear identification.
4
Operating temperature range-35 … 85 °C.
5
FeatureCompact design with a weight of only 12.6 g.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Clamping units
4
Total number of potentials
4
Pin spacing
10 mm / 0.394 inches
Width
40 mm / 1.575 inches
Height
12.9 mm / 0.508 inches
Depth
37.5 mm / 1.476 inches
Use
for "Clean Ground" applications
Coding
Q
Variable coding
No
Marking
N PE1 PE2 L
Potential Marking
N PE1 PE2 L
Mating force of a plug-in connection
approx. 20 70 N (depending on pole number)
Retention force of a plug-in connection
Locked: > 80 N
Unmating force of a plug-in connection
Unlocked: approx. 20 70 N (depending on pole number)
Number of mating cycles
200, without resistive load
Protection type
IP20; When mated and secured with a strain relief housing: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)
Contact type (pluggable connector)
Female connector/socket
Connector (connection type)
for conductor
Mismating protection
Yes
Note on mismating protection
All WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180c.) plugging while laterally staggeredd.) plugging one pole
Locking lever
Can be retrofitted
Locking of plug-in connection
locking lever
Note on locking system
All connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).
Note (material data)
Information on material specifications can be found here
Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 16 A and voltages up to 600 V. For further information, please contact your local sales office.
