WAGO 721-271/001-000 THT male header connector for PCBs, 11 poles, 7.5mm pin spacing, and preceding GND contact.
Product Model721-271/001-000
Product ID44781
Stock on Request
Last updated: 8/29/2026
Key Features
1
Feature100% protected against mismating
2
FeaturePreceding ground contact for enhanced safety
3
FeatureStraight 1.2 x 1.2 mm solder pins for easy PCB mounting
4
Feature7.5 mm pin spacing for reliable connections
5
FeatureMade from durable Polyamide 66 (PA 66) insulating material
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Total number of potentials
10
Number of connection types
1
Number of levels
1
Pin spacing
7.5 mm / 0.295 inches
Width
75.5 mm / 2.972 inches
Height
17 mm / 0.669 inches
Height from the surface
12 mm / 0.472 inches
Depth
11.4 mm / 0.449 inches
Solder pin length
5mm
Solder pin dimensions
1.2 x 1.2 mm
Drilled hole diameter with tolerance
1.7(+0.1)mm
Variable coding
Yes
Anti-rotation protection
Yes
Contact type (pluggable connector)
Male connector/plug
Connector (connection type)
for PCB
Mismating protection
Yes
Plugging without loss of pin spacing
No
Mating direction to the PCB
90°
Locking of plug-in connection
none
PCB contact
THT
Solder pin arrangement
over the entire male connector (in-line)
Number of solder pins per potential
1
Note (material data)
Information on material specifications can be found here
