WAGO 734-324/018-000 male connector with CAGE CLAMP technology, 1.5 mm² wire cross section, and 3.5 mm pin spacing.
Product Model734-324/018-000
Product ID43104
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureHigh reliability with 100% protection against mismating
2
FeatureEasy installation with CAGE CLAMP technology
3
FeatureSuitable for DIN-35 rail and panel mounting
4
Wide temperature range-60 °C to +100 °C
5
FeatureCompact design with a width of 86.4 mm / 3.402 inch
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Clamping units
24
Total number of potentials
24
Number of connection types
1
Number of levels
1
Pin spacing
3.5 mm / 0.138 inches
Width
86.4 mm / 3.402 inches
Height
17.9 mm / 0.705 inches
Height from the surface
13.4 mm / 0.528 inches
Depth
22.3 mm / 0.878 inches
Drilled hole diameter for snap-in mounting foot with tolerance
3.5(+0.1)mm
Variable coding
Yes
Housing sheet thickness
0.6 1.2 mm / 0.024 0.047 inches
Mounting type
Panel mounting
Anti-rotation protection
Yes
Contact type (pluggable connector)
Male connector/plug
Connector (connection type)
for conductor
Mismating protection
Yes
Plugging without loss of pin spacing
No
Locking of plug-in connection
none
Note (material data)
Information on material specifications can be found here
