Connects ETHERNET to WAGO-I/O-SYSTEM. Automatic configuration, supports analog, digital, and specialty modules.
Product Model750-352/040-000
Product ID42738
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureAutomatically configures and creates a local process image
2
FeatureSupports analog, digital, and specialty modules
3
FeatureFeatures two ETHERNET interfaces with Auto-Negotiation and Auto-MDI(X)
4
FeatureCompact design with DIN-35 rail mounting
5
FeatureOperates in a wide temperature range (-40 … 70 °C) and high humidity environments
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Communications
EtherNet/IPTM
ETHERNET protocols
HTTP
Transmission rate
10/100 Mbit/s
Transmission medium (communication/fieldbus)
Twisted pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
Transmission performance
Class D per EN 50173
Number of modules per node (max.)
64
Input and output process image (fieldbus) max.
1020 words/1020 words
Supply voltage (system)
24 VDC; via pluggable connector (CAGE CLAMP® connection); Derating must be observed!
Current consumption (5 V system supply)
450mA
Total current (system supply)
700mA
Input current (typ.) at nominal load (24 V)
280mA
Power supply efficiency (typ.) at nominal load (24 V)
90%
Rated surge voltage
1 kV
Ratings per
IEC/EN 60664-1
Derating
Derating (supply voltage):Ambient temperatures under laboratory conditions: (?25 +30°%);for ?40 +55掳°C: 24掳V (?25 +20°%);for +55 +70°°C: 24掳V (?25 +10°%);Lower limit in all temperature ranges: ?27.5°% (including 15°% residual ripple)
Connection technology: communication/fieldbus
EtherNet/IPTM: 2 x RJ-45; Modbus (TCP, UDP): 2 x RJ-45
Connection technology: system supply
2 x CAGE CLAMP®
Connection type 1
System supply
Solid conductor
0.25 1.5 mm2 / 24 16 AWG
Fine-stranded conductor
0.25 1.5 mm2 / 24 16 AWG
Strip length
5 6 mm / 0.2 0.24 inches
Connection technology: device configuration
1 x Male connector; 4-pole
Width
49.5 mm / 1.949 inches
Height
96.8 mm / 3.811 inches
Depth
71.9 mm / 2.831 inches
Depth from upper-edge of DIN-rail
64.7 mm / 2.547 inches
Mounting type
DIN-35 rail
Color
dark gray
Housing material
Polycarbonate; polyamide 6.6
Fire load
1.397MJ
Weight
80.6g
Conformity marking
CE
Ambient temperature (operation)
-40 … +70 °C
Ambient temperature (storage)
-40 … 85 °C
Protection type
IP20
Pollution degree
2 per IEC 61131-2
Operating altitude
without temperature derating: 0 2000 m; with temperature derating: 2000 5000 m (0.5 K/100 m); 5000 m (max.)
Mounting position
Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)
95%
Relative humidity (with condensation)
Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)
Vibration resistance
per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155; EN 61373
Shock resistance
per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks; 25g/6 ms/1,000 shocks), EN 50155, EN 61373
EMC immunity to interference
per EN 61000-6-1, -2; EN 61131-2; marine applications; EN 50121-3-2; EN 50121-4, -5; EN 60255-26;EN 60870-2-1; EN 61850-3; IEC 61000-6-5; IEEE 1613; VDEW: 1994
EMC emission of interference
per EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5
Exposure to pollutants
per IEC 60068-2-42 and IEC 60068-2-43
Permissible pollutant concentration H2S at a relative humidity < 75%
10ppm
Permissible pollutant concentration SO 2 at a relative humidity < 75%
