281-673/281-411

Name: 281-673/281-411
Brand: WAGO
SKU: 281-673/281-411

3-conductor component terminal block with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; gray.

Product Model281-673/281-411

Key Features

1
Feature3-conductor design
2
FeatureIncludes diode 1N4007
3
FeatureSuitable for DIN-rail 35 x 15 and 35 x 7.5
4
Feature4 mm² wire capacity
5
FeatureCAGE CLAMP® for secure connection

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Specifications may be subject to change without notice

Parameter

Value

Parameter

Value

Clamping units

Total number of potentials

Number of levels

Width

6 mm / 0.236 inches

Height

73.5 mm / 2.894 inches

Depth from upper-edge of DIN-rail

29 mm / 1.142 inches

Connectable conductor materials (note)

Terminating Aluminum ConductorsWAGO Spring-Clamp Terminal Blocks are suitable for solid aluminum conductors up to 4 mm2/12 AWG if WAGO 鈥淎lu-PlusContact Paste249-130is used for termination.鈥淎lu-PlusContact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP®Spring Pressure Connection Technology,aluminum conductors must first be cleaned with a bladeand then immediately inserted into the clamping units filled with 鈥淎lu-Pluscontact paste.It is also possible to apply WAGO 鈥淎lu-Plus鈥漚dditionallyon the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm2 = 16 A4 mm2 = 22 A

Solid conductor

0.08 4 m㎡/ 28 12 AWG