WAGO 713-1426/107-000 is a THT male header, 2-row with 0.8 x 0.8 mm solder pin, angled, and 100% protected against mismating.
Product Model713-1426/107-000
Product ID41976
Stock on Request
Last updated: 8/29/2026
Key Features
1
Feature100% protected against mismating
2
FeatureAngled design for easy connection
3
Feature0.8 x 0.8 mm solder pin
4
FeatureThreaded flange for secure mounting
5
Feature12-pole configuration
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Total number of potentials
12
Number of connection types
1
Number of levels
2
Pin spacing
3.5 mm / 0.138 inches
Width
31.1 mm / 1.224 inches
Height
17.1 mm / 0.673 inches
Height from the surface
13.3 mm / 0.524 inches
Depth
13.5 mm / 0.531 inches
Solder pin length
3.8mm
Solder pin dimensions
0.8 x 0.8 mm
Drilled hole diameter with tolerance
1.2(+0.1)mm
Variable coding
Yes
Anti-rotation protection
Yes
Contact type (pluggable connector)
Male connector/plug
Connector (connection type)
for PCB
Mismating protection
Yes
Plugging without loss of pin spacing
No
Mating direction to the PCB
0°
Locking of plug-in connection
Threaded flange
PCB contact
THT
Solder pin arrangement
over the entire male connector (in-line)
Number of solder pins per potential
1
Note (material data)
Information on material specifications can be found here
