The 722-733 THT female header is designed for board-to-board and board-to-wire connections, featuring a 7.5 mm pin spacing and 3-pole configuration.
Product Model722-733
Product ID41839
Stock on Request
Last updated: 8/29/2026
Key Features
1
Feature100% protected against mismating
2
FeatureStraight and angled solder pins for horizontal or vertical PCB mounting
3
FeatureEasy-to-identify PCB inputs and outputs
4
FeatureTouch-proof PCB outputs
5
FeatureRated voltage (III / 3) 500 V, Rated impulse voltage (III / 3) 6 kV
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Total number of potentials
3
Number of connection types
1
Number of levels
1
Pin spacing
7.5 mm / 0.295 inches
Width
21.5 mm / 0.846 inches
Height
23.25 mm / 0.915 inches
Height from the surface
18.25 mm / 0.719 inches
Depth
11.6 mm / 0.457 inches
Solder pin length
5mm
Solder pin dimensions
0.6 x 1 mm
Drilled hole diameter with tolerance
1.3(+0.1)mm
Variable coding
Yes
Anti-rotation protection
Yes
Contact type (pluggable connector)
Female header
Connector (connection type)
for PCB
Mismating protection
Yes
Plugging without loss of pin spacing
No
Mating direction to the PCB
90°
Locking of plug-in connection
none
PCB contact
THT
Solder pin arrangement
over the entire female connector (in-line)
Number of solder pins per potential
1
Note (material data)
Information on material specifications can be found here
