8-level terminal block for matrix patching; without locking clips; one potential per level; with 2.3 mm Ø test port; for 35 x 15 mounting rail; 1.5 mm².
Product Model727-134
Product ID41703
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureDesigned for matrix patching with 8 decks/levels
2
FeatureFeatures a center marking slot
3
FeatureAccommodates 8 feed-through poles, supporting 32 wires with 16 clamps on each side
4
FeatureSuitable for wire sizes ranging from 0.08mm² to 1.5mm² (#28AWG to #16AWG)
5
FeatureRated current of 10A
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
60V Ex i application = peak value (table 4, EN 50020)
Safety information 2
when approved by the manufacturer鈥檚 authorized inspection representative
Clamping units
32
Total number of potentials
8
Number of levels
8
Width
7.62 mm / 0.3 inches
Height
226 mm / 8.898 inches
Depth from upper-edge of DIN-rail
58.5 mm / 2.303 inches
Marking
plain
Design
horizontal type
Mounting type
DIN-35 rail
Marking level
Center marking
Note (material data)
Information on material specifications can be found here
