3-conductor sensor terminal block; LED (yellow); for PNP-(high-side) switching sensors; with pluggable signal level; 1 mm; Push-in CAGE CLAMP; 1,00 mm; gray.
Product Model2020-5311
Product ID41690
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureHigh-performance rail-mount terminal block system
2
FeaturePush-in termination of solid and stranded conductors
3
FeatureVibration-proof and maintenance-free connection technology
4
FeatureSecure female plugs via locking levers and strain relief plates
5
FeatureIndustry-proven spring pressure connection technology
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Note
According to EN 61984, pluggable connectors without a current interrupting capacity must not be mated or unmated when live or under load. An appropriate end plate must be applied to the carrier terminal blocks after each female plug.
Clamping units
6
Female plug slots
2
Total number of potentials
4
Number of levels
3
Number of jumper slots
4
Width
7 mm / 0.276 inches
Height
81.1 mm / 3.193 inches
Depth from upper-edge of DIN-rail
52.4 mm / 2.063 inches
Mounting type
DIN-35 rail
Marking level
Center/side marking
Note (material data)
Information on material specifications can be found here
