WAGO 734-139 THT male header; 1.0 x 1.0 mm solder pin; straight; 100% protected against mismating; Pin spacing 3.5 mm; 9-pole.
Product Model734-139
Product ID41435
Stock on Request
Last updated: 8/29/2026
Key Features
1
Feature100% protected against mismating
2
Feature1.0 x 1.0 mm solder pin
3
FeatureStraight design
4
Feature3.5 mm pin spacing
5
Feature9-pole configuration
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Total number of potentials
9
Number of connection types
1
Number of levels
1
Pin spacing
3.5 mm / 0.138 inches
Width
26.9 mm / 1.059 inches
Height
14.8 mm / 0.583 inches
Height from the surface
10.3 mm / 0.406 inches
Depth
8.5 mm / 0.335 inches
Solder pin length
4.5mm
Solder pin dimensions
1 x 1 mm
Drilled hole diameter with tolerance
1.4(+0.1)mm
Variable coding
Yes
Anti-rotation protection
Yes
Contact type (pluggable connector)
Male connector/plug
Connector (connection type)
for PCB
Mismating protection
Yes
Plugging without loss of pin spacing
No
Mating direction to the PCB
90°
Locking of plug-in connection
none
PCB contact
THT
Solder pin arrangement
over the entire male connector (in-line)
Number of solder pins per potential
1
Note (material data)
Information on material specifications can be found here
