2000-5410

Name: 2000-5410
Brand: WAGO
SKU: 2000-5410

4-conductor sensor terminal block with ground connection via vertical jumper, rail mount, 4-conductor, 7 mm wide, gray.

Product Model2000-5410

Product ID41326

Stock on Request

Last updated: 8/29/2026

Quantity

Key Features

1
Feature2-pole configuration
2
FeatureGround connection via vertical jumper
3
FeatureRail mount design
4
Feature4-conductor setup
5
Feature7 mm wide, gray color

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Specifications may be subject to change without notice

Parameter

Value

Parameter

Value

Safety information

Ground connection via commoning to terminal blocks with ground foot

Clamping units

Total number of potentials

Number of levels

Number of jumper slots

Width

7 mm / 0.276 inches

97.3 mm / 3.831 inches

Depth from upper-edge of DIN-rail

52.4 mm / 2.063 inches

Mounting type

DIN-35 rail

Marking level

Center/side marking

Note (material data)

Information on material specifications can be found here

Color

gray

Material group

Insulation material (main housing)

Polyamide (PA66)

Flammability class per UL94

Fire load

0.377MJ

Weight

17.5g

Processing temperature

-35 … +85 °C

Continuous operating temperature

-60 … +105 °C

eCl@ss 10.0

27-14-11-28

eCl@ss 9.0

27-14-11-28

ETIM 9.0

EC000900

ETIM 8.0

EC000900

ECCN

NO US CLASSIFICATION

PU (SPU)

50 pcs

Packaging type

Box

Country of origin

GTIN

4055143442244

Customs tariff number

8536904000

RoHS Compliance Status

Compliant,No Exemption

Ratings per

IEC/EN 60947-7-1

Rated voltage (III / 3)

250V

Rated impulse voltage (III / 3)

4kV

Rated current

13.5A

Legend (ratings)

(III / 3) ≙ Overvoltage category III / Pollution degree 3

Approvals per

CSA 22.2 No 158

Rated voltage UL (Use Group B)

300V

Rated current UL (Use Group B)

15A

Rated voltage UL (Use Group D)

300V

Rated current UL (Use Group D)

15A

Rated voltage CSA (Use Group C)

300V

Rated current CSA (Use Group C)

10A

Power loss, per pole (potential)

0.434W

Rated current IN for specified power loss

13.5A

Resistance value for specified, current-dependent power loss

0.002Ω

Connection technology

Push-in CAGE CLAMP®

Actuation type

Operating tool

Connectable conductor materials

Copper

Nominal cross-section

1 mm2

Solid conductor

0.14 1.5 m㎡/ 24 16 AWG

Solid conductor; push-in termination

0.5 1.5 m㎡/ 20 16 AWG

Fine-stranded conductor

0.14 1.5 m㎡/ 24 16 AWG

Fine-stranded conductor; with insulated ferrule

0.14 0.75 m㎡/ 24 18 AWG

Fine-stranded conductor; with ferrule; push-in termination

0.5 0.75 m㎡/ 20 18 AWG

Note (conductor cross-section)

Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.

Strip length

9 11 mm / 0.35 0.43 inches

Wiring direction

Front-entry wiring

Test specification Railway applications Rolling stock Electronic equipment

DIN EN 50155 (VDE 0115-200):2022-06

Test procedure Railway applications Rolling stock equipment Shock and vibration tests

DIN EN 61373 (VDE 0115-0106):2011-04

Spectrum/Installation location

Service life test, Category 1, Class A/B

Function test with noise-like vibration

Test passed according to Section 8 of the standard

Frequency

f1= 5 Hz to f2= 150 Hz

Acceleration

5g (highest test level used for all axes)

Test duration per axis

5 h

Test directions

X, Y and Z axes

Monitoring for contact faults/interruptions

Passed

Voltage drop measurement before and after each axis

Passed

Simulated service life test through increased levels of noise-like vibration

Test passed according to Section 9 of the standard

Extended test scope: Monitoring for contact faults/interruptions

Passed

Extended test scope: Voltage drop measurement before and after each axis

Passed

Shock test

Test passed according to Section 10 of the standard

Shock form

Half sine

Shock duration

30 ms

Number of shocks per axis

3 pos. und 3 neg.

Vibration and shock stress for rolling stock equipment

Passed