4-pole H-Distribution Connector with 1 input and 2 outputs on one side, featuring 2 locking levers and a black finish.
Product Model770-944
Product ID41230
Stock on Request
Last updated: 8/29/2026
Key Features
1
Feature4-pole design for efficient signal distribution
2
Feature1 input and 2 outputs on one side for compact installation
3
Feature2 locking levers for secure connection
4
FeatureBlack finish for durability and aesthetics
5
FeatureIdeal for WINSTA® MIDI 770 Series applications
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Total number of potentials
4
PE function
Preceding PE contact
Pin spacing
10 mm / 0.394 inches
Width
40 mm / 1.575 inches
Height
36.7 mm / 1.445 inches
Depth
51 mm / 2.008 inches
Use
General mains applications
Coding
A
Marking
N ⏚ 2/L 1/L'
Potential Marking
N ⏚ 2/L 1/L'
Mating force of a plug-in connection
approx. 20 70 N (depending on pole number)
Retention force of a plug-in connection
When locked: > 80 N
Unmating force of a plug-in connection
Unlocked: approx. 20 70 N (depending on pole number)
Number of mating cycles
200, without resistive load
Type of distribution box
h-distribution connector, outputs at one end
Protection type
IP20; When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)
Contact type (pluggable connector)
Socket/plug
Mismating protection
Yes
Note on mismating protection
All WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180c.) plugging while laterally staggeredd.) plugging one pole
Locking lever
yes
Locking of plug-in connection
locking lever
Note on locking system
All connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).
Note (material data)
Information on material specifications can be found here
Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 16 A and voltages up to 600 V. For further information, please contact your local sales office.
