Pluggable connectors for rail-mount terminal blocks equipped with CAGE CLAMP connection.
Product Model722-139
Product ID40063
Stock on Request
Last updated: 8/29/2026
Key Features
1
Feature100% protected against mismating
2
Feature9-pole configuration
3
Feature5 mm pin spacing
4
FeatureLight gray color
5
FeaturePolyamide 66 (PA 66) insulating material
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Total number of potentials
9
Number of connection types
1
Number of levels
1
Pin spacing
5 mm / 0.197 inches
Width
46.5 mm / 1.831 inches
Height
23.25 mm / 0.915 inches
Height from the surface
18.25 mm / 0.719 inches
Depth
11.6 mm / 0.457 inches
Solder pin length
5mm
Solder pin dimensions
0.6 x 1 mm
Drilled hole diameter with tolerance
1.3(+0.1)mm
Variable coding
Yes
Anti-rotation protection
Yes
Contact type (pluggable connector)
Female header
Connector (connection type)
for PCB
Mismating protection
Yes
Plugging without loss of pin spacing
No
Mating direction to the PCB
90°
Locking of plug-in connection
none
PCB contact
THT
Solder pin arrangement
over the entire female connector (in-line)
Number of solder pins per potential
1
Note (material data)
Information on material specifications can be found here
