5-pole plug with Cod. B coding, 4.00 mm² conductor cross-section, and gray color. Features push-in CAGE CLAMP® connection technology.
Product Model770-255/064-000
Product ID40039
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureMaintenance-free push-in CAGE CLAMP® spring pressure connection technology
2
FeatureProtected against mismating with Cod. B coding
3
FeatureSupports two wire connections per pole for loops or bridges
4
FeatureRated for up to 600 V and 23 A according to UL 1977
5
FeatureDurable construction with polyamide insulation and chrome nickel spring steel clamping springs
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Variants:
Other pole markings
Clamping units
10
Total number of potentials
5
Pin spacing
10 mm / 0.394 inches
Width
50 mm / 1.969 inches
Height
12.9 mm / 0.508 inches
Depth
37.5 mm / 1.476 inches
Use
Control technology
Coding
B
Variable coding
Yes
Marking
1L 2L L ⏚ N
Potential Marking
1L 2L L ⏚ N
Mating force of a plug-in connection
approx. 20 70 N (depending on pole number)
Retention force of a plug-in connection
Locked: > 80 N
Unmating force of a plug-in connection
Unlocked: approx. 20 70 N (depending on pole number)
Number of mating cycles
200, without resistive load
Protection type
IP20; When mated and secured with a strain relief housing: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)
Contact type (pluggable connector)
Male connector/plug
Connector (connection type)
for conductor
Mismating protection
Yes
Note on mismating protection
All WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180c.) plugging while laterally staggeredd.) plugging one pole
Locking lever
Can be retrofitted
Locking of plug-in connection
locking lever
Note on locking system
All connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).
Note (material data)
Information on material specifications can be found here
Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 16 A and voltages up to 600 V. For further information, please contact your local sales office.
