Angled THT female header with 12 poles, 5.08 mm pin spacing, and clamping collar. Ideal for wire-to-wire and board-to-wire connections.
Product Model232-272/031-000
Product ID39553
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureUniversal connection for all conductor types
2
FeatureEasy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
3
FeatureVersions available with snap-in mounting feet or flanges for panel or through-panel mounting
4
FeatureCoding fingers for secure connections
5
FeatureCompliant with various standards including IEC 61984, CSA, and UL
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Safety information
TheMCS MULTI CONNECTION SYSTEMincludes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load.When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
Variants:
Other pole numbers
Total number of potentials
12
Number of connection types
1
Number of levels
1
Pin spacing
5.08 mm / 0.2 inches
Width
75.76 mm / 2.983 inches
Height
16.6 mm / 0.654 inches
Height from the surface
11.6 mm / 0.457 inches
Depth
18.25 mm / 0.719 inches
Solder pin length
5mm
Solder pin dimensions
0.6 x 1 mm
Drilled hole diameter with tolerance
1.3(+0.1)mm
Variable coding
Yes
Mounting type
Feed-through mounting
Anti-rotation protection
Yes
Contact type (pluggable connector)
Female header
Connector (connection type)
for PCB
Mismating protection
No
Plugging without loss of pin spacing
No
Mating direction to the PCB
0°
Locking of plug-in connection
none
PCB contact
THT
Solder pin arrangement
over the entire female connector (in-line)
Number of solder pins per potential
1
Note (material data)
Information on material specifications can be found here
