WAGO 890-213 3-pole pluggable terminal block, Cod. A, for 1.50 mm² wires. Ideal for secure and efficient connections.
Product Model890-213
Product ID38824
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureSecure and reliable connections with Cod. A coding
2
FeatureSuitable for wires with a cross section of 1.50 mm²
3
FeatureEasy to install and maintain
4
FeatureCompact 3-pole design for space-saving applications
5
FeatureDurable construction for long-lasting performance
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Clamping units
3
Total number of potentials
3
PE function
Preceding PE contact
Pin spacing
4.4 mm / 0.173 inches
Width
15 mm / 0.591 inches
Height
11.7 mm / 0.461 inches
Depth
34.1 mm / 1.343 inches
Use
General mains applications
Coding
A
Variable coding
Yes
Marking
N ⏚ L
Potential Marking
N ⏚ L
Mating force of a plug-in connection
approx. 20 70 N (depending on pole number)
Retention force of a plug-in connection
Locked: > 80 N
Unmating force of a plug-in connection
Unlocked: approx. 20 70 N (depending on pole number)
Number of mating cycles
200, without resistive load
Protection type
IP20; IP40 when mated with strain relief housing
Contact type (pluggable connector)
Male connector/plug
Connector (connection type)
for conductor
Mismating protection
Yes
Note on mismating protection
All WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180c.) plugging while laterally staggeredd.) plugging one pole
Locking lever
Can be retrofitted
Locking of plug-in connection
locking lever
Note on locking system
All connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).
Note (material data)
Information on material specifications can be found here
Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 5 A and voltages up to 600 V. For further information, please contact your local sales office.
