High-performance motion control module for stepper motors with 187 kHz pulse frequency and 3.8 W power dissipation.
Product ModelTSXCFY11
Product ID34951
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeaturePrecision control for stepper motors with 187 kHz pulse frequency.
2
FeatureLow power dissipation of 3.8 W for efficient operation.
3
FeatureIdeal for applications requiring high accuracy and reliability.
4
FeatureComplementary I/O modularity for flexible integration.
5
FeatureSuitable for a wide range of precision control applications.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Range of Product
Modicon Premium Automation platform
Product or Component Type
Motion control module
Product Specific Application
For stepper motors
Software Designation
Unity Pro
I/O modularity
1 axis
Maximum pulse frequency
187 kHz
Power dissipation in W
3.8 W
Input type
Current sink auxiliary input EN/IEC 61131 type 2Resistive amplifier input
Discrete input logic
Negative amplifier inputPositive auxiliary input
Input voltage
24 V 7 mA auxiliary input5 V 4.5 mA amplifier input
Input voltage limits
19...30 V auxiliary input
Voltage state 1 guaranteed
< 2 V amplifier input>= 11 V auxiliary input
Current state 1 guaranteed
>= 6 mA auxiliary input)
Voltage state 0 guaranteed
<= 5 V auxiliary input> 3.6 V amplifier input
Current state 0 guaranteed
<= 2 mA auxiliary input)
Input impedance
3400 Ohm auxiliary input
Input immunity
< 250 µs auxiliary input for homing cam and event inputs15...30 µs amplifier input for loss of step input3000...10000 µs auxiliary input for limit switch, emergency stop and external stop inputs3000...16000 µs amplifier input for amplifier fault input
Power supply monitoring
0...14 V auxiliary input at fault state18...24 V auxiliary input at OK state
Maximum detection time
< 30 ms auxiliary input from fault to OK state> 1 ms auxiliary input from OK to fault state
Input compatibility
With 2-wire/3-wire sensor auxiliary input
Output type
Open collector PNP brake output EN/IEC 61131-2RS422, TTL 5 V open collector NPN compatible amplifier output
Output differential voltage
+/- 2 V <= 100 Ohm amplifier output
Maximum output short-circuit current
150 mA amplifier output
Permissible common mode voltage
7 V amplifier output
Maximum permissible differential voltage
12 V amplifier output
Output voltage
24 V DC 19...30 V brake output
Nominal output current
0.5 A <0.3 mA 0.625 A brake output
Maximum voltage drop
<1 V at state on brake output
Switching time
< 0.25 ms brake output
Output compatibility
Positive logic DC inputs (resistance <= 15 kOhm) brake output
Short-circuit protection
Thermal tripping via program or automatically brake output
Output overload protection
Current limiter brake output
Output overvoltage protection
Zener diode brake output
Reverse polarity protection
Brake output reverse mounted diode on supply
Speed profile path
Trapezoidal
Operating Mode
OFFManuallyDirect drive modeAUTO
Checks
Sensor power supplyAmplifier, limits switches, emergency stopShort circuit (one signalling bit per channel)Correct execution by software position limits, loss of stepValidity of parametersConsistency of commands
Optional commands
BoostBrake
Local signalling
for module operating (RUN) 1 LED (green) for external fault (I/O) 1 LED (red) for internal fault, module failure (ERR) 1 LED (red) for axis diagnostics available (CH.) 2 LEDs (green)
