The TSXCTY2A counter module from Schneider Electric offers precise counting and timing capabilities, ideal for various automation applications.
Product ModelTSXCTY2A
Product ID34767
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeaturePrecise counting and timing capabilities
2
FeatureReliable performance in automation applications
3
FeatureEfficient and compact design
4
FeatureEasy integration with Modicon Premium automation platform
5
FeatureHigh-frequency counter operation up to 1 MHz
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Range of Product
Modicon Premium Automation platform
Product or Component Type
Counter modules
I/O modularity
2 channels
Electrical circuit type
Auxiliary output EN/IEC 61131
Counting frequency
40 kHz
Power dissipation in W
4.5...6 W
Cycle time
5 ms
Discrete input logic
Current sink auxiliary input (preset, enable and read) IEC 1131 Type 2Resistive 2/3-wire proximity sensors PNP/NPN input IEC 1131 Type 2Resistive encoder input
Input logic
Positive
Input compatibility
2/3-wire proximity sensors PNP/NPNIncremental encoder 10...30 V totem poleIncremental encoder 5 V DC RS422
Input voltage
24 V 18 mA 2/3-wire proximity sensors PNP/NPN24 V 7 mA auxiliary input (preset, enable and read)5 V 18 mA encoder input
Input voltage limits
<= 5.5 V encoder input19...30 V 2/3-wire proximity sensors PNP/NPN19...30 V auxiliary input (preset, enable and read)
Voltage state 1 guaranteed
>= 11 V 2/3-wire proximity sensors PNP/NPN>= 11 V auxiliary input (preset, enable and read)>= 2.4 V encoder input
Current state 1 guaranteed
>= 3.7 mA encoder input)>= 6 mA 2/3-wire proximity sensors PNP/NPN)>= 6 mA auxiliary input (preset, enable and read))
Voltage state 0 guaranteed
<= 1.2 V encoder input<= 5 V 2/3-wire proximity sensors PNP/NPN<= 5 V auxiliary input (preset, enable and read)
Current state 0 guaranteed
<= 1 mA encoder input)<= 2 mA 2/3-wire proximity sensors PNP/NPN)<= 2 mA auxiliary input (preset, enable and read))
Response time
< 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read)
Input impedance
Encoder input > 270 Ohm at U = 2.4 V2/3-wire proximity sensors PNP/NPN 1400 Ohm at UnAuxiliary input (preset, enable and read) 3400 Ohm at UnEncoder input 400 Ohm at Un
Output voltage
24 V DC
Nominal output current
0.5 A
Output voltage limits
19...30 V
Maximum voltage drop
<0.5 V at state 1
Output compatibility
Positive logic DC inputs (resistance <= 15 kOhm) auxiliary output
Maximum leakage current
0.1 mA
Switching frequency
< 0.6/LI² Hz on inductive load
Output overload protection
Thermal tripping via program or automaticallyCurrent limiter
Output short-circuit protection
Thermal tripping via program or automaticallyCurrent limiter
Output overvoltage protection
Zener diode
Reverse polarity protection
Reverse diode on supply
Checks
Sensor power supply
Current consumption
280 mA 5 V DC30 mA 24 V DC
Module format
Standard
Local signalling
for module operating (RUN) 1 LED (green) for external fault (I/O) 1 LED (red) for internal fault, module failure (ERR) 1 LED (red) for axis diagnostics available (CH.) 2 LEDs (green)
