TSXCAY41

Name: TSXCAY41
Brand: Schneider
SKU: TSXCAY41

Product ModelTSXCAY41

Product ID34757

Stock on Request

Last updated: 8/29/2026

Quantity

Key Features

1
FeatureReliable Performance
2
FeatureEfficient Design
3
FeatureScalable Solutions
4
FeatureAdvanced Features
5
FeatureDurable Construction

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Specifications may be subject to change without notice

Parameter

Value

Parameter

Value

Range of Product

Modicon Premium Automation platform

Product or Component Type

Motion control modules

Product Specific Application

For servo motors

Servo loop type

Proportional to overshoot compensation and gain switching 4 ms

Checks

Presence of voltage/sensor feedback counter inputConsistency of commandsEncoder coupling, servo drive present, emergency stopProper execution of movementSensor power supplyValidity of parameters

Speed profile path

Trapezoidal or parabolic

Resolution

>= 0.5 position units per point<= 1000 position units per point

Length of axis

32000...32000000 P

Acquisition speed

<= 270000 points/mn>= 54000 points/mn

Acceleration time

8 ms...10 s

Operating Mode

AutomaticOFFDirect drive modeFOLLOWERManual

Type of axis

Following axis static ratioLimited axis

I/O modularity

4 axes

Input compatibility

Absolute encoder SSI output 16...25 bitsIncremental encoder 10...30 V totem poleIncremental encoder 5 V DC RS422With 2-wire/3-wire sensor (24 DC) auxiliary inputAbsolute encoder parallel output ABE7CPA11

Clock frequency

200 kHz SSI absolute encoder

Incremental encoder frequency x1

500 kHz

Incremental encoder frequency x 4

1000 kHz in counting250 kHz in input

Power dissipation in W

10...17 W

Input type

Current sink auxiliary input EN/IEC 1131 Type 2Resistive servo drive control input EN/IEC 1131 Type 1Resistive counter input

Input logic

Positive

Input voltage

24 V 8 mA auxiliary input24 V 8 mA servo drive control input5 V 18 mA counter input

Input voltage limits

<= 5.5 V counter input19...30 V auxiliary input19...30 V servo drive control input

Voltage state 1 guaranteed

>= 11 V auxiliary input>= 11 V servo drive control input>= 2.4 V counter input

Current state 1 guaranteed

>= 3.5 mA servo drive control input)>= 3.7 mA counter input)>= 6 mA auxiliary input)

Voltage state 0 guaranteed

<= 1.2 V counter input<= 5 V auxiliary input<= 5 V servo drive control input

Current state 0 guaranteed

<= 1 mA counter input)<= 1.5 mA servo drive control input)<= 2 mA auxiliary input)

Input impedance

270 Ohm counter input3000 Ohm auxiliary input3000 Ohm servo drive control input

Number of outputs

4 reflex output static EN/IEC 611314 analogue output static4 servo drive validation output relay

Analogue output range

+/- 10...24 V

Analogue output resolution

13 bits + sign

LSB value

1.25 mV analogue output

Output voltage

24 V DC reflex output: 24 V DC servo drive validation output:

Output voltage limits

Reflex output 19...30 VServo drive validation output 5...30 V

Nominal output current

0.5 A reflex output

Maximum output current

1.5 mA analogue output200 mA servo drive validation output625 mA reflex output

Minimum load

1 mA 1 V

Maximum voltage drop

<1 V at state on reflex output

Maximum leakage current

0.3 mA reflex output

Switching time

< 5 ms for servo drive validation< 500 Âµs for reflex output

Output compatibility

Positive logic DC inputs (resistance <= 15 kOhm) reflex

Short-circuit protection

Current limiter reflex outputThermal tripping reflex output

Output overload protection

Current limiter reflex outputThermal tripping reflex output

Output overvoltage protection

Zener diode between outputs and 24 DC reflex output

Reverse polarity protection

Reflex output reverse diode on supply

Local signalling

for module operating (RUN) 1 LED (green) for external fault (I/O) 1 LED (red) for internal fault, module failure (ERR) 1 LED (red) for axis diagnostics available 4 LEDs (green)

Electrical connection

1 connector HE-10 20 pins for servo drive ctrl inputs + for ext power supply of servo drive inputs/outputs3 connectors HE-10 20 pins for aux inputs, reflex output, for external sensor and preactuator power supply1 connector SUB-D 9 for an analogue output (speed reference)4 connectors SUB-D 15 for an incremental or absolute encoder

Current consumption

22...40 mA 24 V DC on 10/30 V absolute encoder module1500 mA 5 V DC30 mA 24 V DC

Module format

Double

Net Weight

1.34 lb(US) (0.61 kg)

Protective treatment

Ambient Air Temperature for Operation

32...140 °F (0...60 °C)

Ambient Air Temperature for Storage

-13...158 °F (-25...70 °C)

Relative Humidity

5...95 % without condensation

Operating altitude

<= 6561.68 ft (2000 m)