ATV21WD75N4C

Class B EMC filter integrated

3 phase

100 hp

1...10

Quadratic voltage/frequency ratioConstant voltage/frequency ratioCurrent flux vector control (FVC) without speed feedbackConstant voltage/frequency ratio with automatic IR compensationEnergy saving ratio

No impedance

Communication card APOGEE FLNCommunication card BACnetCommunication card LonWorksCommunication card METASYS N2

50...60 Hz - 5...5 %

105.3 kVA 380 V

160 A 380 V160 A 460 V

0.5...200 Hz

6...16 kHz adjustable8...16 kHz with derating factor

+/- 15 %

Not available in voltage/frequency ratio motor controlAutomatic whatever the loadAdjustable

<= power supply voltage

With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVCWithout mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVCWithout mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR

5.3 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)141.6 lbf.in (16 N.m), 142 lb.in L1/R, L2/S, L3/T)362.9 lbf.in (41 N.m), 360 lb.in U/T1, V/T2, W/T3)

2

F 2 ms +/- 0.5 ms discreteR 2 ms +/- 0.5 ms discreteRES 2 ms +/- 0.5 ms discreteVIA 2 ms +/- 0.5 ms analogVIB 2 ms +/- 0.5 ms analog

+/- 1 % FM) for a temperature variation 60 °C+/- 0.6 % VIA) for a temperature variation 60 °C+/- 0.6 % VIB) for a temperature variation 60 °C

1

2

3 mA 24 V DC configurable relay logic

F programmable 24 V DC level 1 PLC 3500 OhmR programmable 24 V DC level 1 PLC 3500 OhmRES programmable 24 V DC level 1 PLC 3500 Ohm

Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s

Against input phase loss driveBreak on the control circuit driveInput phase breaks driveLine supply overvoltage and undervoltage driveLine supply undervoltage driveOvercurrent between output phases and earth driveOverheating protection driveOvervoltages on the DC bus driveShort-circuit between motor phases driveThermal power stage driveMotor phase break motorThermal protection motorWith PTC probes motorAgainst exceeding limit speed drive

Analog input 0.024/50 HzDisplay unit 0.1 Hz

2-wire RS 485

9600 bps or 19200 bps

1...247

CE

39.4 in (1000 mm)

14.3 in (364 mm)

3535 V DC between earth and power terminals5092 V DC between control and power terminals

IEC 61800-3 category C1IEC 61800-3 environments 1 category C3EN 61800-3 category C1EN 61800-3 environments 2 category C2EN 61800-3EN 61800-3 environments 2 category C3EN 61800-3 environments 1 category C3EN 55011 group 1 class BIEC 61800-3 environments 1 category C2IEC 61800-3 environments 2 category C3EN 61800-3 environments 1 category C2IEC 61800-3 environments 2 category C2IEC 61800-3IEC 61800-3 environments 2 category C1IEC 61800-3 environments 1 category C1EN 61800-5-1EN 61800-3 environments 1 category C1EN 61800-3 environments 2 category C1IEC 61800-5-1

1 gn 13...200 Hz)EN/IEC 60068-2-81.5 mm 3...13 Hz)EN/IEC 60068-2-6

3 IEC 61800-5-1

5...95 % without condensation IEC 60068-2-35...95 % without dripping water IEC 60068-2-3