ATV21WD18N4

380...480 V - 15...10 %

18.5 kW

27.8 A 480 V34.9 A 380 V

120 % of nominal motor torque +/- 10 % 60 s

Modbus

IP54 EN 60530IP54 EN 61800-5-2IP54 IEC 60529IP54 IEC 61800-5-1

323...528 V

47.5...63 Hz

22 kA

40.7 A 60 s

8 kHz

+/- 10 % of nominal slip 0.2 Tn to Tn

Adjustable PI regulator

for DC bus energized 1 LED (red)

Electrical between power and control

VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.004 in² (2.5 mm²) / AWG 14L1/R, L2/S, L3/T terminal 0.04 in² (25 mm²) / AWG 3

Internal supply 24 V DC 21...27 V), <200 mA overload and short-circuit protectionInternal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection

VIA switch-configurable current 0...20 mA 242 Ohm 11 bitsVIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 11 bitsVIB configurable PTC probe 0...6 probes 1500 OhmVIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 11 bits

FLA, FLC 7 ms +/- 0.5 ms discreteFLB, FLC 7 ms +/- 0.5 ms discreteFM 2 ms +/- 0.5 ms analogRY, RC 7 ms +/- 0.5 ms discrete

FM +/- 0.2 % outputVIA +/- 0.15 % of maximum value inputVIB +/- 0.15 % of maximum value input

FM switch-configurable current 0...20 mA 500 Ohm 10 bitsFM switch-configurable voltage 0...10 V DC 470 Ohm 10 bits

Configurable relay logic FLA, FLC) NO - 100000 cyclesConfigurable relay logic FLB, FLC) NC - 100000 cyclesConfigurable relay logic RY, RC) NO - 100000 cycles

2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R)2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R)5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R)

Negative logic (sink) F, R, RES), >= 16 V, <= 10 VPositive logic (source) F, R, RES), <= 5 V, >= 11 V

By DC injection

>= 1 mOhm 500 V DC for 1 minute

1 RJ45

RTU

8 bits, 1 stop, odd even or no configurable parity

Write single register (06)Monitoring inhibitableWrite multiple registers (16) 2 words maximumRead device identification (43)Read holding registers (03) 2 words maximumTime out setting from 0.1 to 100 s

Vertical +/- 10 degree

12.2 in (310 mm)

82.5 lb(US) (37.4 kg)

3535 V DC between earth and power terminals5092 V DC between control and power terminals

EN 61800-3 environments 2 category C3EN 61800-3 environments 2 category C2IEC 61800-5-1IEC 61800-3 environments 2 category C1EN 61800-5-1IEC 61800-3 environments 2 category C3EN 55011 class A group 1EN 61800-3 environments 1 category C1IEC 61800-3 environments 1 category C3IEC 61800-3 environments 1 category C1EN 61800-3 environments 1 category C3IEC 61800-3 category C3IEC 61800-3 environments 2 category C2EN 61800-3IEC 61800-3 category C2IEC 61800-3EN 61800-3 environments 1 category C2IEC 61800-3 environments 1 category C2EN 61800-3 environments 2 category C1EN 61800-3 category C2EN 61800-3 category C3

1 gn 13...200 Hz)EN/IEC 60068-2-81.5 mm 3...13 Hz)EN/IEC 60068-2-6

2 IEC 61800-5-1

5...95 % without condensation IEC 60068-2-35...95 % without dripping water IEC 60068-2-3

-13...158 °F (-25...70 °C)