ATV212WD18N4

Altivar 212

Pumps and fans in HVAC

380...480 V - 15...10 %

IP55 IEC 61800-5-1IP55 IEC 60529

37 A 380 V37 A 460 V

0.5...200 Hz

+/- 10 % of nominal slip 0.2 Tn to Tn

<= power supply voltage

Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPRWithout mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVCWith UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC

5.3 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)47.8 lbf.in (5.4 N.m), 48 lb.in L1/R, L2/S, L3/T)

2 ms +/- 0.5 ms F discrete2 ms +/- 0.5 ms R discrete2 ms +/- 0.5 ms RES discrete3.5 ms +/- 0.5 ms VIA analog22 ms +/- 0.5 ms VIB analog

+/- 0.6 % VIA) for a temperature variation 60 °C+/- 0.6 % VIB) for a temperature variation 60 °C+/- 1 % FM) for a temperature variation 60 °C

FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bitsFM switch-configurable current 0...20 mA 970 Ohm 10 bits

3 mA 24 V DC configurable relay logic

F programmable 24 V DC level 1 PLC 4700 OhmR programmable 24 V DC level 1 PLC 4700 OhmRES programmable 24 V DC level 1 PLC 4700 Ohm

3535 V DC between earth and power terminals5092 V DC between control and power terminals

Display unit 0.1 HzAnalog input 0.024/50 Hz

Communication card LonWorks

HVAC

2

1

1 RJ451 open style

RTU

8 bits, 1 stop, odd even or no configurable parity

Flux vector control without sensor, standardVoltage/frequency ratio, 2 pointsVoltage/frequency ratio - Energy Saving, quadratic U/fVoltage/frequency ratio, 5 pointsVoltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)

120 % of nominal motor torque +/- 10 % 60 s

AdjustableAutomatic whatever the loadNot available in voltage/frequency ratio motor control

8 kHz

47.5...63 Hz

Overheating protection driveThermal power stage driveShort-circuit between motor phases driveInput phase breaks driveOvercurrent between output phases and earth driveOvervoltages on the DC bus driveBreak on the control circuit driveAgainst exceeding limit speed driveLine supply overvoltage and undervoltage driveLine supply undervoltage driveAgainst input phase loss driveThermal protection motorMotor phase break motorWith PTC probes motor

26.2 in (665 mm)

82.5 lb(US) (37.4 kg)

1.5 mm 3...13 Hz)IEC 60068-2-61 gn 13...200 Hz)EN/IEC 60068-2-8

Classes 3C1 IEC 60721-3-3Classes 3S2 IEC 60721-3-3

3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m<= 3280.84 ft (1000 m) without derating

14...104 °F (-10...40 °C) without derating)104...122 °F (40...50 °C) with derating factor)

NOM 117ULC-tickCSA

EN 55011 class A group 1IEC 61800-3 environments 2 category C3IEC 61800-3 environments 2 category C3IEC 61800-3 environments 1 category C3IEC 61800-3 environments 2 category C2IEC 61800-3 environments 1 category C2IEC 61800-3 environments 2 category C1IEC 61800-5-1IEC 61800-3EN 61800-3 category C3IEC 61800-5-1IEC 61800-3 environments 1 category C1IEC 61800-3 environments 1 category C1IEC 61800-3 environments 2 category C2IEC 61800-3 category C3IEC 61800-3 environments 1 category C2IEC 61800-3 environments 1 category C3IEC 61800-3 category C2IEC 61800-3 category C2IEC 61800-3 environments 2 category C1IEC 61800-3

Electrostatic discharge immunity test level 3 IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3Electrical fast transient/burst immunity test level 4 IEC 61000-4-41.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5Conducted radio-frequency immunity test level 3 IEC 61000-4-6Voltage dips and interruptions immunity test IEC 61000-4-11