ATV212HU22M3X

Name: ATV212HU22M3X
Brand: Schneider
SKU: ATV212HU22M3X

The ATV212HU22M3X is a versatile variable speed drive designed for efficient motor control, offering a wide speed range and high accuracy.

Product ModelATV212HU22M3X

Product ID33005

Stock on Request

Last updated: 8/29/2026

Quantity

Key Features

1
FeatureEfficient motor control with a wide speed range (1…10)
2
FeatureHigh accuracy with +/- 10% of nominal slip 0.2 Tn to Tn
3
FeatureCompact design for easy installation and reduced costs
4
FeatureInnovative Reduced Harmonic Technology (RHT) for immediate, disturbance-free operation
5
FeatureAdvanced protection functions including thermal protection and overcurrent protection

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Specifications may be subject to change without notice

Parameter

Value

Parameter

Value

Device short name

ATV212

Product destination

Asynchronous motors

Phase

3 phase

Motor power kW

2.2 kW

Maximum Horse Power Rating

3 hp

Supply voltage limits

170...264 V

50...60 Hz - 5...5 %

Line current

7.3 A 240 V8.7 A 200 V

Range of Product

Altivar 212

Product or Component Type

Variable speed drive

Product Specific Application

Pumps and fans in HVAC

communication port protocol

APOGEE FLNModbusLonWorksMETASYS N2BACnet

[Us] rated supply voltage

200...240 V - 15...10 %

EMC filter

Without EMC filter

IP degree of protection

IP20 on upper part without blanking plate on cover IEC 61800-5-1IP20 on upper part without blanking plate on cover IEC 60529IP21 IEC 61800-5-1IP21 IEC 60529IP41 on upper part IEC 61800-5-1IP41 on upper part IEC 60529

Apparent power

4 kVA 240 V

Continuous output current

10.6 A 230 V

Maximum transient current

11.7 A 60 s

Speed drive output frequency

0.5...200 Hz

Speed range

1...10

Speed accuracy

+/- 10 % of nominal slip 0.2 Tn to Tn

Local signalling

for DC bus energized 1 LED (red)

Output voltage

<= power supply voltage

Isolation

Electrical between power and control

Type of cable

Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPRWithout mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVCWith UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC

Electrical connection

VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.004 inÂ² (2.5 mmÂ²) / AWG 14L1/R, L2/S, L3/T terminal 0.009 inÂ² (6 mmÂ²) / AWG 10

Tightening torque

11.5 lbf.in (1.3 N.m), 11.5 lb.in L1/R, L2/S, L3/T)5.3 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)

Supply

Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protectionInternal supply 24 V DC 21...27 V), <200 A overload and short-circuit protection

Sampling duration

2 ms +/- 0.5 ms F discrete2 ms +/- 0.5 ms R discrete2 ms +/- 0.5 ms RES discrete3.5 ms +/- 0.5 ms VIA analog22 ms +/- 0.5 ms VIB analog

Response time

FM 2 ms +/- 0.5 ms analogFLA, FLC 7 ms +/- 0.5 ms discreteFLB, FLC 7 ms +/- 0.5 ms discreteRY, RC 7 ms +/- 0.5 ms discrete

Accuracy

+/- 0.6 % VIA) for a temperature variation 60 °C+/- 0.6 % VIB) for a temperature variation 60 °C+/- 1 % FM) for a temperature variation 60 °C

Linearity error

VIA +/- 0.15 % of maximum value inputVIB +/- 0.15 % of maximum value inputFM +/- 0.2 % output

Analogue output type

FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bitsFM switch-configurable current 0...20 mA 970 Ohm 10 bits

Discrete output type

Configurable relay logic FLA, FLC) NO - 100000 cyclesConfigurable relay logic FLB, FLC) NC - 100000 cyclesConfigurable relay logic RY, RC) NO - 100000 cycles

Minimum switching current

3 mA 24 V DC configurable relay logic

Maximum switching current

5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R)5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R)2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R)2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)

Discrete input type

F programmable 24 V DC level 1 PLC 4700 OhmR programmable 24 V DC level 1 PLC 4700 OhmRES programmable 24 V DC level 1 PLC 4700 Ohm

Discrete input logic

Positive logic (source) F, R, RES), <= 5 V, >= 11 VNegative logic (sink) F, R, RES), >= 16 V, <= 10 V

Dielectric strength

2830 V DC between earth and power terminals4230 V DC between control and power terminals

Insulation resistance

>= 1 mOhm 500 V DC for 1 minute

Frequency resolution

Display unit 0.1 HzAnalog input 0.024/50 Hz

Communication Service

Time out setting from 0.1 to 100 sMonitoring inhibitableRead device identification (43)Read holding registers (03) 2 words maximumWrite multiple registers (16) 2 words maximumWrite single register (06)

Option card

Communication card LonWorks

Power dissipation in W

120 W

Air flow

10831.2 Gal/hr(US) (41 m3/h)

Specific application

HVAC

Variable speed drive application selection

Building - HVAC compressor for scrollBuilding - HVAC fanBuilding - HVAC pump

Motor power range AC-3

2.2...3 kW 200...240 V 3 phase

Motor starter type

Variable speed drive

Discrete output number

Analogue input number

Analogue input type

VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bitsVIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bitsVIB configurable PTC probe 0...6 probes 1500 OhmVIA switch-configurable current 0...20 mA 250 Ohm 10 bits

Analogue output number

Physical interface

2-wire RS 485

Connector Type

1 RJ451 open style

Transmission Rate

9600 bps or 19200 bps

Transmission frame

RTU

Number of addresses

1...247

Data format

8 bits, 1 stop, odd even or no configurable parity

Type of polarization

No impedance

Asynchronous motor control profile

Voltage/frequency ratio, 5 pointsVoltage/frequency ratio - Energy Saving, quadratic U/fVoltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)Flux vector control without sensor, standardVoltage/frequency ratio, 2 points

Torque accuracy

+/- 15 %

Transient overtorque

120 % of nominal motor torque +/- 10 % 60 s

Acceleration and deceleration ramps

Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s

Motor slip compensation

Automatic whatever the loadAdjustableNot available in voltage/frequency ratio motor control

Switching frequency

6...16 kHz adjustable12...16 kHz with derating factor

Nominal switching frequency

12 kHz

Braking to standstill

By DC injection

Network Frequency

47.5...63 Hz

Prospective line Isc

5 kA

Protection type

Overheating protection driveThermal power stage driveShort-circuit between motor phases driveInput phase breaks driveOvercurrent between output phases and earth driveOvervoltages on the DC bus driveBreak on the control circuit driveAgainst exceeding limit speed driveLine supply overvoltage and undervoltage driveLine supply undervoltage driveAgainst input phase loss driveThermal protection motorMotor phase break motorWith PTC probes motor

Width

4.2 in (107 mm)

Height

5.6 in (143 mm)

Depth

5.9 in (150 mm)

Net Weight

4.0 lb(US) (1.8 kg)

Pollution degree

3 IEC 61800-5-1

Vibration resistance

1.5 mm 3...13 Hz)IEC 60068-2-61 gn 13...200 Hz)EN/IEC 60068-2-8

Shock resistance

15 gn 11 ms IEC 60068-2-27

Environmental characteristic

Classes 3C1 IEC 60721-3-3Classes 3S2 IEC 60721-3-3

Noise level

51 dB 86/188/EEC

Operating altitude

3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m<= 3280.84 ft (1000 m) without derating

Relative humidity

5...95 % without condensation IEC 60068-2-35...95 % without dripping water IEC 60068-2-3

Ambient air temperature for operation

14...104 °F (-10...40 °C) without derating)104...122 °F (40...50 °C) with derating factor)

Operating position

Vertical +/- 10 degree

Product Certifications

ULCSANOM 117C-tick

marking

Standards

IEC 61800-5-1IEC 61800-3 environments 1 category C1UL Type 1IEC 61800-3IEC 61800-3 environments 2 category C3IEC 61800-3 environments 1 category C2IEC 61800-3 environments 2 category C1IEC 61800-5-1IEC 61800-3 environments 1 category C2IEC 61800-3 environments 1 category C1IEC 61800-3 environments 2 category C1IEC 61800-3 environments 1 category C3IEC 61800-3 environments 2 category C3IEC 61800-3 environments 2 category C2IEC 61800-3 environments 2 category C2IEC 61800-3IEC 61800-3 environments 1 category C3

Assembly style

With heat sink

Electromagnetic compatibility

Electrostatic discharge immunity test level 3 IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3Electrical fast transient/burst immunity test level 4 IEC 61000-4-41.2/50 Âµs - 8/20 Âµs surge immunity test level 3 IEC 61000-4-5Conducted radio-frequency immunity test level 3 IEC 61000-4-6Voltage dips and interruptions immunity test IEC 61000-4-11

Regulation loop

Adjustable PI regulator

Ambient Air Temperature for Storage

-13...158 °F (-25...70 °C)