ATV212HD55N4

Name: ATV212HD55N4
Brand: Schneider
SKU: ATV212HD55N4

Efficient and reliable variable speed drive for industrial applications.

Product ModelATV212HD55N4

Product ID33000

Stock on Request

Last updated: 8/29/2026

Quantity

Key Features

1
FeatureHigh efficiency and reliability for industrial applications.
2
FeatureVariable speed control from 0.5 to 200 Hz.
3
FeatureWide speed range of 1 to 10.
4
FeatureUser-friendly interface for easy operation.
5
FeatureCompliant with EMC IP21 standards.

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Specifications may be subject to change without notice

Parameter

Value

Parameter

Value

Device short name

ATV212

Product destination

Asynchronous motors

Phase

3 phase

Motor power kW

55 kW

Maximum Horse Power Rating

75 hp

Supply voltage limits

323...528 V

50...60 Hz - 5...5 %

Line current

102.7 A 380 V89 A 480 V

Range of Product

Altivar 212

Product or Component Type

Variable speed drive

Product Specific Application

Pumps and fans in HVAC

communication port protocol

METASYS N2BACnetLonWorksAPOGEE FLNModbus

[Us] rated supply voltage

380...480 V - 15...10 %

EMC filter

Class C2 EMC filter integrated

IP degree of protection

IP20 on upper part without blanking plate on cover IEC 61800-5-1IP20 on upper part without blanking plate on cover IEC 60529IP21 IEC 61800-5-1IP21 IEC 60529IP41 on upper part IEC 61800-5-1IP41 on upper part IEC 60529

Apparent power

76.3 kVA 380 V

Continuous output current

116 A 380 V116 A 460 V

Maximum transient current

127.6 A 60 s

Speed drive output frequency

0.5...200 Hz

Speed range

1...10

Speed accuracy

+/- 10 % of nominal slip 0.2 Tn to Tn

Local signalling

for DC bus energized 1 LED (red)

Output voltage

<= power supply voltage

Isolation

Electrical between power and control

Type of cable

Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPRWithout mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVCWith UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC

Electrical connection

VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.004 inÂ² (2.5 mmÂ²) / AWG 14L1/R, L2/S, L3/T terminal 0.2 inÂ² (150 mmÂ²) 300 kcmil)

Tightening torque

5.3 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)362.9 lbf.in (41 N.m), 360 lb.in L1/R, L2/S, L3/T)

Supply

Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protectionInternal supply 24 V DC 21...27 V), <200 A overload and short-circuit protection

Sampling duration

2 ms +/- 0.5 ms F discrete2 ms +/- 0.5 ms R discrete2 ms +/- 0.5 ms RES discrete3.5 ms +/- 0.5 ms VIA analog22 ms +/- 0.5 ms VIB analog

Response time

FM 2 ms +/- 0.5 ms analogFLA, FLC 7 ms +/- 0.5 ms discreteFLB, FLC 7 ms +/- 0.5 ms discreteRY, RC 7 ms +/- 0.5 ms discrete

Accuracy

+/- 0.6 % VIA) for a temperature variation 60 °C+/- 0.6 % VIB) for a temperature variation 60 °C+/- 1 % FM) for a temperature variation 60 °C

Linearity error

VIA +/- 0.15 % of maximum value inputVIB +/- 0.15 % of maximum value inputFM +/- 0.2 % output

Analogue output type

FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bitsFM switch-configurable current 0...20 mA 970 Ohm 10 bits

Discrete output type

Configurable relay logic FLA, FLC) NO - 100000 cyclesConfigurable relay logic FLB, FLC) NC - 100000 cyclesConfigurable relay logic RY, RC) NO - 100000 cycles

Minimum switching current

3 mA 24 V DC configurable relay logic

Maximum switching current

5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R)5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R)2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R)2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)

Discrete input type

F programmable 24 V DC level 1 PLC 4700 OhmR programmable 24 V DC level 1 PLC 4700 OhmRES programmable 24 V DC level 1 PLC 4700 Ohm

Discrete input logic

Positive logic (source) F, R, RES), <= 5 V, >= 11 VNegative logic (sink) F, R, RES), >= 16 V, <= 10 V

Dielectric strength

3535 V DC between earth and power terminals5092 V DC between control and power terminals

Insulation resistance

>= 1 mOhm 500 V DC for 1 minute

Frequency resolution

Display unit 0.1 HzAnalog input 0.024/50 Hz

Communication Service

Time out setting from 0.1 to 100 sWrite multiple registers (16) 2 words maximumWrite single register (06)Read holding registers (03) 2 words maximumRead device identification (43)Monitoring inhibitable

Option card

Communication card LonWorks

Power dissipation in W

1455 W

Air flow

131560.04 Gal/hr(US) (498 m3/h)

Functionality

Mid

Specific application

HVAC

Variable speed drive application selection

Building - HVAC compressor for scrollBuilding - HVAC fanBuilding - HVAC pump

Motor power range AC-3

55...100 kW 380...440 V 3 phase55...100 kW 480...500 V 3 phase

Motor starter type

Variable speed drive

Discrete output number

Analogue input number

Analogue input type

VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bitsVIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bitsVIB configurable PTC probe 0...6 probes 1500 OhmVIA switch-configurable current 0...20 mA 250 Ohm 10 bits

Analogue output number

Physical interface

2-wire RS 485

Connector Type

1 open style1 RJ45

Transmission Rate

9600 bps or 19200 bps

Transmission frame

RTU

Number of addresses

1...247

Data format

8 bits, 1 stop, odd even or no configurable parity

Type of polarization

No impedance

Asynchronous motor control profile

Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)Flux vector control without sensor, standardVoltage/frequency ratio, 5 pointsVoltage/frequency ratio - Energy Saving, quadratic U/fVoltage/frequency ratio, 2 points

Torque accuracy

+/- 15 %

Transient overtorque

120 % of nominal motor torque +/- 10 % 60 s

Acceleration and deceleration ramps

Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s

Motor slip compensation

AdjustableAutomatic whatever the loadNot available in voltage/frequency ratio motor control

Switching frequency

6...16 kHz adjustable8...16 kHz with derating factor

Nominal switching frequency

8 kHz

Braking to standstill

By DC injection

Network Frequency

47.5...63 Hz

Prospective line Isc

22 kA

Protection type

Overheating protection driveThermal power stage driveShort-circuit between motor phases driveInput phase breaks driveOvercurrent between output phases and earth driveOvervoltages on the DC bus driveBreak on the control circuit driveAgainst exceeding limit speed driveLine supply overvoltage and undervoltage driveLine supply undervoltage driveAgainst input phase loss driveThermal protection motorMotor phase break motorWith PTC probes motor

Width

12.6 in (320 mm)

Height

24.8 in (630 mm)

Depth

11.4 in (290 mm)

Pollution degree

3 IEC 61800-5-1

Vibration resistance

1.5 mm 3...13 Hz)IEC 60068-2-61 gn 13...200 Hz)EN/IEC 60068-2-8

Shock resistance

15 gn 11 ms IEC 60068-2-27

Environmental characteristic

Classes 3C1 IEC 60721-3-3Classes 3S2 IEC 60721-3-3

Noise level

63.7 dB 86/188/EEC

Operating altitude

3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m<= 3280.84 ft (1000 m) without derating

Relative humidity

5...95 % without condensation IEC 60068-2-35...95 % without dripping water IEC 60068-2-3

Ambient air temperature for operation

14...104 °F (-10...40 °C) without derating)104...122 °F (40...50 °C) with derating factor)

Operating position

Vertical +/- 10 degree

Product Certifications

C-tickULCSANOM 117

marking

Standards

IEC 61800-3 environments 1 category C1IEC 61800-3 environments 1 category C3IEC 61800-5-1IEC 61800-3IEC 61800-3 environments 2 category C1IEC 61800-3IEC 61800-3 environments 1 category C2EN 55011 class A group 1IEC 61800-3 environments 1 category C1IEC 61800-3 environments 2 category C3IEC 61800-3 environments 1 category C2IEC 61800-3 environments 2 category C3IEC 61800-3 environments 2 category C2UL Type 1IEC 61800-3 category C2IEC 61800-3 category C3IEC 61800-5-1EN 61800-3 category C3IEC 61800-3 environments 2 category C2IEC 61800-3 environments 1 category C3IEC 61800-3 category C2IEC 61800-3 environments 2 category C1

Assembly style

With heat sink

Electromagnetic compatibility

Electrostatic discharge immunity test level 3 IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3Electrical fast transient/burst immunity test level 4 IEC 61000-4-41.2/50 Âµs - 8/20 Âµs surge immunity test level 3 IEC 61000-4-5Conducted radio-frequency immunity test level 3 IEC 61000-4-6Voltage dips and interruptions immunity test IEC 61000-4-11

Regulation loop

Adjustable PI regulator

Ambient Air Temperature for Storage

-13...158 °F (-25...70 °C)