SchneiderContactors and Protection Relays

LC1D80008R6

Name: LC1D80008R6
Brand: Schneider
SKU: LC1D80008R6

Product ModelLC1D80008R6

Product ID32652

Stock on Request

Last updated: 8/29/2026

Quantity

Key Features

1
FeatureIdeal for a wide range of motor starter applications, including resistive and motor control.
2
FeatureFeatures 2NO-2NC contacts and 3600 cycles/hr operating cycles for reliable performance.
3
FeatureNew TeSys D green electronic coil reduces energy consumption by up to 80% compared to standard AC or DC coils.
4
FeatureSimplified maintenance with 90% fewer references needed, reducing downtime and increasing efficiency.
5
FeatureHigh fault short circuit current ratings provide flexibility in component selection, ensuring compatibility with various systems.

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Specifications may be subject to change without notice

Parameter

Value

Parameter

Value

Range

TeSys

Range of Product

TeSys Deca

Product or Component Type

Contactor

Device short name

LC1D

Contactor application

Resistive load

Utilisation category

AC-1

[Ue] rated operational voltage

Power circuit <= 300 V DC 25...400 HzPower circuit <= 690 V AC

[Ie] rated operational current

125 A (at <140 °F (60 °C)) at <= 440 V AC AC-1 for power circuit

[Uc] control circuit voltage

440 V AC 60 Hz

compatibility code

LC1D

Pole contact composition

2 NO + 2 NC

Protective cover

Without

[Ith] conventional free air thermal current

125 A (at 140 °F (60 °C)) for power circuit

Irms rated making capacity

1100 A at 440 V for power circuit conforming to IEC 60947

Rated breaking capacity

1100 A at 440 V for power circuit conforming to IEC 60947

[Icw] rated short-time withstand current

640 A 104 °F (40 °C) - 10 s for power circuit990 A 104 °F (40 °C) - 1 s for power circuit135 A 104 °F (40 °C) - 10 min for power circuit320 A 104 °F (40 °C) - 1 min for power circuit

Associated fuse rating

200 A gG at <= 690 V coordination type 1 for power circuit160 A gG at <= 690 V coordination type 2 for power circuit

Average impedance

0.8 mOhm - Ith 125 A 50 Hz for power circuit

Power dissipation per pole

12.5 W AC-1

[Ui] rated insulation voltage

Power circuit 600 V CSAPower circuit 600 V ULPower circuit 1000 V IEC 60947-4-1

Overvoltage category

III

Pollution degree

[Uimp] rated impulse withstand voltage

8 kV IEC 60947

Safety reliability level

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Mechanical durability

10 Mcycles

Electrical durability

0.8 Mcycles 125 A AC-1 <= 440 V

Control circuit type

AC 60 Hz

Coil technology

Without built-in suppressor module

Control circuit voltage limits

0.85...1.1 Uc -40...131 °F (-40...55 °C) operational AC 60 Hz0.3...0.6 Uc -40...158 °F (-40...70 °C) drop-out AC 60 Hz1...1.1 Uc 131...158 °F (55...70 °C) operational AC 60 Hz

Inrush power in VA

220 VA 60 Hz cos phi 0.75 (at 68 °F (20 °C))

Hold-in power consumption in VA

22 VA 60 Hz cos phi 0.3 (at 68 °F (20 °C))

Heat dissipation

6...10 W at 60 Hz

Operating time

20...35 ms closing6...20 ms opening

Maximum operating rate

3600 cyc/h 140 °F (60 °C)

Connections - terminals

Control circuit: screw clamp terminals 2 0.002...0.004 inÂ² (1...2.5 mmÂ²) - cable stiffness: flexible with cable endControl circuit: screw clamp terminals 1 0.002...0.004 inÂ² (1...2.5 mmÂ²) - cable stiffness: flexible with cable endControl circuit: screw clamp terminals 1 0.002...0.006 inÂ² (1...4 mmÂ²) - cable stiffness: flexible without cable endControl circuit: screw clamp terminals 2 0.002...0.006 inÂ² (1...4 mmÂ²) - cable stiffness: flexible without cable endControl circuit: screw clamp terminals 1 0.002...0.006 inÂ² (1...4 mmÂ²) - cable stiffness: solid without cable endControl circuit: screw clamp terminals 2 0.002...0.006 inÂ² (1...4 mmÂ²) - cable stiffness: solid without cable endPower circuit: connector 1 0.006...0.08 inÂ² (4...50 mmÂ²) - cable stiffness: flexible without cable endPower circuit: connector 2 0.006...0.04 inÂ² (4...25 mmÂ²) - cable stiffness: flexible without cable endPower circuit: connector 1 0.006...0.08 inÂ² (4...50 mmÂ²) - cable stiffness: flexible with cable endPower circuit: connector 2 0.006...0.02 inÂ² (4...16 mmÂ²) - cable stiffness: flexible with cable endPower circuit: connector 1 0.006...0.08 inÂ² (4...50 mmÂ²) - cable stiffness: solid without cable endPower circuit: connector 2 0.006...0.04 inÂ² (4...25 mmÂ²) - cable stiffness: solid without cable end

Tightening torque

Control circuit 10.6 lbf.in (1.2 N.m) screw clamp terminals flat Ã 6 mmControl circuit 10.6 lbf.in (1.2 N.m) screw clamp terminals Philips No 2Power circuit 106.2 lbf.in (12 N.m) connector flat Ã 6 to Ã 8 mmPower circuit 106.2 lbf.in (12 N.m) connector hexagonal 0.2 in (4 mm)

Mounting Support

PlateRail

Standards

CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508

Product Certifications

RINAGLULGOSTDNVLROS (Lloyds register of shipping)CSABVCCC

IP degree of protection

IP20 front face IEC 60529

Protective treatment

THIEC 60068-2-30

Climatic withstand

IACS E10 exposure to damp heat

Permissible ambient air temperature around the device

-76...176 °F (-60...80 °C) storage-40...140 °F (-40...60 °C) operation140...158 °F (60...70 °C) with derating

Operating altitude

0...9842.52 ft (0...3000 m)

Fire resistance

1562 °F (850 °C) IEC 60695-2-1

Flame retardance

V1 conforming to UL 94

Mechanical robustness

Vibrations contactor open 2 Gn, 5...300 Hz) Shocks contactor open 8 Gn for 11 ms) Vibrations contactor closed 3 Gn, 5...300 Hz) Shocks contactor closed 10 Gn for 11 ms)

Height

5.0000000000 in (127 mm)

Width

3.8 in (96 mm)

Depth

5.5 in (140 mm)

Net Weight

4.06 lb(US) (1.84 kg)