SchneiderContactors and Protection Relays

LC1D65004Q5

Name: LC1D65004Q5
Brand: Schneider
SKU: LC1D65004Q5

Product ModelLC1D65004Q5

Product ID32468

Stock on Request

Last updated: 8/29/2026

Quantity

Key Features

1
FeatureReliable Performance
2
FeatureEfficient Operation
3
FeatureCompact Design
4
FeatureEasy Installation
5
FeatureHigh Current Rating

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Specifications may be subject to change without notice

Parameter

Value

Parameter

Value

Range of Product

TeSys D

Product or Component Type

Contactor

Device short name

LC1D

Contactor application

Resistive load

Utilisation category

AC-1

Poles description

[Ue] rated operational voltage

Power circuit <= 690 V AC 25...400 Hz

[Ie] rated operational current

80 A (at <140 °F (60 °C)) AC AC-1 for power circuit

[Uc] control circuit voltage

380 V AC 50 Hz

Maximum Horse Power Rating

10 hp at 230/240 V AC 60 Hz for 1 phase motors conforming to CSA10 hp at 230/240 V AC 60 Hz for 1 phase motors conforming to UL20 hp at 200/208 V AC 60 Hz for 3 phase motors conforming to CSA20 hp at 200/208 V AC 60 Hz for 3 phase motors conforming to UL20 hp at 230/240 V AC 60 Hz for 3 phase motors conforming to CSA20 hp at 230/240 V AC 60 Hz for 3 phase motors conforming to UL5 hp at 115 V AC 60 Hz for 1 phase motors conforming to CSA5 hp at 115 V AC 60 Hz for 1 phase motors conforming to UL50 hp at 460/480 V AC 60 Hz for 3 phase motors conforming to CSA50 hp at 460/480 V AC 60 Hz for 3 phase motors conforming to UL50 hp at 575/600 V AC 60 Hz for 3 phase motors conforming to CSA50 hp at 575/600 V AC 60 Hz for 3 phase motors conforming to UL

compatibility code

LC1D

Pole contact composition

4 NO

Protective cover

With

[Ith] conventional free air thermal current

10 A (at 140 °F (60 °C)) for control circuit80 A (at 140 °F (60 °C)) for power circuit

Irms rated making capacity

1000 A at 440 V for power circuit conforming to IEC 60947140 A AC for control circuit conforming to IEC 60947-5-1

Rated breaking capacity

1000 A at 440 V for power circuit conforming to IEC 60947

Associated fuse rating

10 A gG for control circuit conforming to IEC 60947-5-1125 A gG at <= 690 V coordination type 1 for power circuit125 A gG at <= 690 V coordination type 2 for power circuit

Average impedance

1 mOhm - Ith 80 A 50 Hz for power circuit

Power dissipation per pole

6.4 W AC-1

[Ui] rated insulation voltage

Control circuit 600 V CSAControl circuit 600 V ULPower circuit 600 V CSAPower circuit 600 V ULControl circuit 690 V IEC 60947-1Power circuit 690 V IEC 60947-1

Overvoltage category

III

[Uimp] rated impulse withstand voltage

8 kV IEC 60947

Safety reliability level

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Mechanical durability

6000000 cycles

Control circuit type

AC 50 Hz standard

Coil technology

Without built-in bidirectional peak limiting diode suppressor

Control circuit voltage limits

0.3...0.6 Uc 140 °F (60 °C) drop-out AC 50/60 Hz0.8...1.1 Uc 140 °F (60 °C) operational AC 50 Hz0.85...1.1 Uc 140 °F (60 °C) operational AC 60 Hz

Inrush power in VA

140 VA cos phi 0.75 (at 68 °F (20 °C))160 VA cos phi 0.75 (at 68 °F (20 °C))

Hold-in power consumption in VA

13 VA 60 Hz cos phi 0.3 (at 68 °F (20 °C))15 VA 50 Hz cos phi 0.3 (at 68 °F (20 °C))

Heat dissipation

4...5 W at 50/60 Hz for control circuit

Operating time

12...26 ms closing4...19 ms opening

Maximum operating rate

3600 cyc/h 140 °F (60 °C)

Connections - terminals

Control circuit: screw clamp terminal 1 0.002...0.006 inÂ² (1...4 mmÂ²) - cable stiffness: solid without cable endControl circuit: screw clamp terminal 2 0.002...0.006 inÂ² (1...4 mmÂ²) - cable stiffness: flexible without cable endControl circuit: screw clamp terminal 2 0.002...0.006 inÂ² (1...4 mmÂ²) - cable stiffness: solid without cable endPower circuit: screw clamp terminal 1 0.002...0.05 inÂ² (1...35 mmÂ²) - cable stiffness: solid without cable endPower circuit: screw clamp terminal 2 0.002...0.05 inÂ² (1...35 mmÂ²) - cable stiffness: solid without cable end

Tightening torque

Control circuit 10.6 lbf.in (1.2 N.m) screw clamp terminal flat Ã 6 mmControl circuit 10.6 lbf.in (1.2 N.m) screw clamp terminal Philips No 2Power circuit 44.3 lbf.in (5 N.m) screw clamp terminal flat Ã 6 mmPower circuit 44.3 lbf.in (5 N.m) screw clamp terminal flat Ã 8 mmControl circuit 10.6 lbf.in (1.2 N.m) screw clamp terminal pozidriv No 2

Auxiliary contacts type

Mechanically linked 1 NO + 1 NC IEC 60947-5-1Mirror contact 1 NC IEC 60947-4-1

Minimum switching voltage

17 V for control circuit

Minimum switching current

5 mA for control circuit

Insulation resistance

> 10 MOhm for control circuit

Non-overlap time

1.5 ms on de-energisation between NC and NO contacts1.5 ms on energisation between NC and NO contacts

Mounting Support

PlateRail

Standards

CSA C22.2 No 14IEC 60947-4-1IEC 60947-5-1EN 60947-4-1UL 508EN 60947-5-1

Product Certifications

LROS (Lloyds register of shipping)GLCCCRINABVDNVGOSTULCSA

IP degree of protection

IP2X IEC 60529IP2X VDE 0106

Protective treatment

TH 3)IEC 60068

Permissible ambient air temperature around the device

-76...176 °F (-60...80 °C) storage-40...140 °F (-40...60 °C) operation140...158 °F (60...70 °C) with derating

Operating altitude

9842.52 ft (3000 m) without derating

Fire resistance

1562 °F (850 °C) IEC 60695-2-1

Flame retardance

V1 conforming to UL 94

Mechanical robustness

Shocks contactor opened 15 gn) Shocks contactor closedVibrations contactor openedVibrations contactor closed

Height

5.0000000000 in (127 mm)

Width

3.3 in (85 mm)

Depth

5.1 in (130 mm)

Net Weight

3.17 lb(US) (1.44 kg)