SchneiderContactors and Protection Relays

LC1D65A6BBE

Name: LC1D65A6BBE
Brand: Schneider
SKU: LC1D65A6BBE

The LC1D65A6BBE is a non-reversing IEC contactor from TeSys Deca Green, rated for 40HP at 480VAC.

Product ModelLC1D65A6BBE

Product ID32399

Stock on Request

Last updated: 8/29/2026

Quantity

Key Features

1
Feature-

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Specifications may be subject to change without notice

Parameter

Value

Parameter

Value

Range

TeSysTeSys Deca

Range of Product

TeSys Deca

Product or Component Type

Contactor

Device short name

LC1D

Contactor application

Motor controlResistive load

Utilisation category

AC-3AC-1AC-3e

[Ue] rated operational voltage

Power circuit <= 690 V AC 25...400 Hz

[Ie] rated operational current

80 A (at <140 °F (60 °C)) at <= 440 V AC-1 for power circuit65 A (at <140 °F (60 °C)) at <= 440 V AC-3 for power circuit65 A (at <140 °F (60 °C)) at <= 440 V AC-3e for power circuit

[Uc] control circuit voltage

24 V DC

Motor power kW

18.5 kW at 220...230 V AC 50 Hz (AC-3)30 kW at 380...400 V AC 50 Hz (AC-3)37 kW at 415 V AC 50 Hz (AC-3)37 kW at 440 V AC 50 Hz (AC-3)37 kW at 500 V AC 50 Hz (AC-3)37 kW at 660...690 V AC 50 Hz (AC-3)18.5 kW at 220...230 V AC 50 Hz (AC-3e)30 kW at 380...400 V AC 50 Hz (AC-3e)37 kW at 415 V AC 50 Hz (AC-3e)37 kW at 440 V AC 50 Hz (AC-3e)37 kW at 500 V AC 50 Hz (AC-3e)37 kW at 660...690 V AC 50 Hz (AC-3e)

Maximum Horse Power Rating

5 hp at 115 V AC 60 Hz for 1 phase motors10 hp at 230/240 V AC 60 Hz for 1 phase motors20 hp at 200/208 V AC 60 Hz for 3 phase motors20 hp at 230/240 V AC 60 Hz for 3 phase motors40 hp at 460/480 V AC 60 Hz for 3 phase motors50 hp at 575/600 V AC 60 Hz for 3 phase motors

compatibility code

LC1D

Pole contact composition

3 NO

Protective cover

With

[Ith] conventional free air thermal current

80 A (at 140 °F (60 °C)) for power circuit10 A (at 140 °F (60 °C)) for signalling circuit

Irms rated making capacity

1000 A at 440 V for power circuit conforming to IEC 60947140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1

Rated breaking capacity

1000 A at 440 V for power circuit conforming to IEC 60947

[Icw] rated short-time withstand current

110 A 104 °F (40 °C) - 10 min for power circuit260 A 104 °F (40 °C) - 1 min for power circuit640 A 104 °F (40 °C) - 10 s for power circuit900 A 104 °F (40 °C) - 1 s for power circuit100 A - 1 s for signalling circuit120 A - 500 ms for signalling circuit140 A - 100 ms for signalling circuit

Associated fuse rating

125 A gG at <= 690 V coordination type 1 for power circuit125 A gG at <= 690 V coordination type 2 for power circuit10 A gG for signalling circuit conforming to IEC 60947-5-1

Average impedance

1.5 mOhm - Ith 80 A 50 Hz for power circuit

Power dissipation per pole

9.6 W AC-16.3 W AC-36.3 W AC-3e

[Ui] rated insulation voltage

Power circuit 690 V IEC 60947-4-1Signalling circuit 690 V IEC 60947-1

Overvoltage category

III

Pollution degree

[Uimp] rated impulse withstand voltage

6 kV IEC 60947

Safety reliability level

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Mechanical durability

6 Mcycles

Electrical durability

1.8 Mcycles 57 A AC-3 <= 440 V0.5 Mcycles 80 A AC-1 <= 440 V1.8 Mcycles 57 A AC-3e <= 440 V

Control circuit type

DC DC low consumption

Coil technology

Built-in bidirectional peak limiting

Control circuit voltage limits

<= 0.1 Uc -40...158 °F (-40...70 °C) drop-out DC0.8...1.2 Uc -40...140 °F (-40...60 °C) operational DC1...1.2 Uc 140...158 °F (60...70 °C) operational DC

Inrush power in W

11 W 68 °F (20 °C))

Hold-in power consumption in W

0.5 W 68 °F (20 °C)

Heat dissipation

0.5 W

Operating time

55...65 ms closing20...80 ms opening

Maximum operating rate

3600 cyc/h at 60 °C

Connections - terminals

Power circuit: lugs-ring terminals - external diameter: 0.6 in (16.5 mm)Control circuit: lugs-ring terminals - external diameter: 0.3 in (8 mm)

Tightening torque

Control circuit 15.05 lbf.in (1.7 N.m) lugs-ring terminals flat Ã 6 mm M3.5Control circuit 15.05 lbf.in (1.7 N.m) lugs-ring terminals Philips No 2 M3.5Power circuit 53.1 lbf.in (6 N.m) lugs-ring terminals hexagonal 0.4 in (10 mm) M6Power circuit 53.1 lbf.in (6 N.m) lugs-ring terminals pozidriv No 2 M4Control circuit 15.05 lbf.in (1.7 N.m) lugs-ring terminals pozidriv No 2 M3.5

Auxiliary contact composition

1 NO + 1 NC

Auxiliary contacts type

Mechanically linked 1 NO + 1 NC IEC 60947-5-1Mirror contact 1 NC IEC 60947-4-1

Signalling circuit frequency

25...400 Hz

Minimum switching voltage

17 V for signalling circuit

Minimum switching current

5 mA for signalling circuit

Insulation resistance

> 10 MOhm for signalling circuit

Non-overlap time

1.5 ms on de-energisation between NC and NO contact1.5 ms on energisation between NC and NO contact

Mounting Support

RailPlate

Standards

EN/IEC 60947-4-1EN/IEC 60947-5-1UL 60947-4-1CSA C22.2 No 60947-4-1IEC 60335-1

Product Certifications

CCCCSAEACULKCDNV-GLLROS (Lloyds register of shipping)UKCA

IP degree of protection

IP20 front face IEC 60529

Climatic withstand

IACS E10 exposure to damp heat IEC 60947-1 Annex Q category D exposure to damp heat

Permissible ambient air temperature around the device

-40...140 °F (-40...60 °C)140...158 °F (60...70 °C) with derating

Operating altitude

0...9842.52 ft (0...3000 m)

Fire resistance

1562 °F (850 °C) IEC 60695-2-1

Flame retardance

V1 conforming to UL 94

Mechanical robustness

Vibrations contactor open 2 Gn, 5...300 Hz) Vibrations contactor closed 4 Gn, 5...300 Hz) Shocks contactor open 10 Gn for 11 ms) Shocks contactor closed 15 Gn for 11 ms)

Height

4.8 in (122 mm)

Width

2.2 in (55 mm)

Depth

4.7 in (120 mm)

Net Weight

2.209 lb(US) (1.002 kg)