SchneiderContactors and Protection Relays

LC1D115004FE7

Name: LC1D115004FE7
Brand: Schneider
SKU: LC1D115004FE7

The LC1D115004FE7 TeSys D Non-Reversing Contactor is a reliable and efficient solution for various industrial applications.

Product ModelLC1D115004FE7

Product ID31439

Stock on Request

Last updated: 8/29/2026

Quantity

Key Features

1
FeatureHigh reliability and efficiency
2
FeatureSuitable for applications up to 200 A and 440 V
3
FeatureFlexible cable stiffness for easy installation
4
FeatureCompact design with screw clamp terminals
5
FeatureIdeal for non-reversing control circuits

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Specifications may be subject to change without notice

Parameter

Value

Parameter

Value

Range

TeSys

Range of Product

TeSys Deca

Product or Component Type

Contactor

Device short name

LC1D

Contactor application

Resistive load

Utilisation category

AC-1AC-3AC-3eAC-4

[Ue] rated operational voltage

Power circuit <= 1000 V AC 25...400 HzPower circuit <= 460 V DC

[Ie] rated operational current

200 A (at <140 °F (60 °C)) at <= 440 V AC AC-1 for power circuit

[Uc] control circuit voltage

115 V AC 50/60 Hz

compatibility code

LC1D

Pole contact composition

4 NO

Protective cover

With

[Ith] conventional free air thermal current

200 A (at 140 °F (60 °C)) for power circuit

Irms rated making capacity

1260 A at 440 V for power circuit conforming to IEC 60947

Rated breaking capacity

1100 A at 440 V for power circuit conforming to IEC 60947

[Icw] rated short-time withstand current

250 A 104 °F (40 °C) - 10 min for power circuit550 A 104 °F (40 °C) - 1 min for power circuit950 A 104 °F (40 °C) - 10 s for power circuit1100 A 104 °F (40 °C) - 1 s for power circuit

Associated fuse rating

250 A gG at <= 690 V coordination type 1 for power circuit200 A gG at <= 690 V coordination type 2 for power circuit

Average impedance

0.6 mOhm - Ith 200 A 50 Hz for power circuit

Power dissipation per pole

24 W AC-1

[Ui] rated insulation voltage

Power circuit 600 V CSAPower circuit 600 V ULPower circuit 1000 V IEC 60947-4-1

Overvoltage category

III

Pollution degree

[Uimp] rated impulse withstand voltage

8 kV IEC 60947

Safety reliability level

B10d = 684932 cycles contactor with nominal load EN/ISO 13849-1B10d = 10000000 cycles contactor with mechanical load EN/ISO 13849-1

Mechanical durability

8 Mcycles

Electrical durability

0.8 Mcycles 200 A AC-1 <= 440 V

Control circuit type

AC 50/60 Hz

Coil technology

Built-in bidirectional peak limiting diode suppressor

Control circuit voltage limits

0.3...0.5 Uc -40...158 °F (-40...70 °C) drop-out AC 50/60 Hz0.8...1.15 Uc -40...131 °F (-40...55 °C) operational AC 50/60 Hz1...1.15 Uc 131...158 °F (55...70 °C) operational AC 50/60 Hz

Inrush power in VA

280...350 VA 60 Hz cos phi 0.8 (at 68 °F (20 °C))280...350 VA 50 Hz cos phi 0.8 (at 68 °F (20 °C))

Hold-in power consumption in VA

2...18 VA 60 Hz cos phi 0.3 (at 68 °F (20 °C))2...18 VA 50 Hz cos phi 0.3 (at 68 °F (20 °C))

Heat dissipation

3...8 W at 50/60 Hz

Operating time

6...20 ms opening20...50 ms closing

Maximum operating rate

2400 cyc/h 140 °F (60 °C)

Connections - terminals

Control circuit: screw clamp terminals 2 0.002...0.004 inÂ² (1...2.5 mmÂ²) - cable stiffness: flexible with cable endControl circuit: screw clamp terminals 1 0.002...0.004 inÂ² (1...2.5 mmÂ²) - cable stiffness: flexible with cable endControl circuit: screw clamp terminals 1 0.002...0.004 inÂ² (1...2.5 mmÂ²) - cable stiffness: flexible without cable endControl circuit: screw clamp terminals 2 0.002...0.004 inÂ² (1...2.5 mmÂ²) - cable stiffness: flexible without cable endControl circuit: screw clamp terminals 1 0.002...0.004 inÂ² (1...2.5 mmÂ²) - cable stiffness: solid without cable endControl circuit: screw clamp terminals 2 0.002...0.004 inÂ² (1...2.5 mmÂ²) - cable stiffness: solid without cable endPower circuit: connector 1 0.02...0.2 inÂ² (10...120 mmÂ²) - cable stiffness: flexible without cable endPower circuit: connector 2 0.02...0.08 inÂ² (10...50 mmÂ²) - cable stiffness: flexible without cable endPower circuit: connector 1 0.02...0.2 inÂ² (10...120 mmÂ²) - cable stiffness: flexible with cable endPower circuit: connector 2 0.02...0.08 inÂ² (10...50 mmÂ²) - cable stiffness: flexible with cable endPower circuit: connector 1 0.02...0.2 inÂ² (10...120 mmÂ²) - cable stiffness: solid without cable endPower circuit: connector 2 0.02...0.08 inÂ² (10...50 mmÂ²) - cable stiffness: solid without cable end

Tightening torque

Control circuit 10.6 lbf.in (1.2 N.m) screw clamp terminals flat Ã 6 mmControl circuit 10.6 lbf.in (1.2 N.m) screw clamp terminals Philips No 2Power circuit 106.2 lbf.in (12 N.m) connector hexagonal 0.2 in (4 mm)Control circuit 10.6 lbf.in (1.2 N.m) screw clamp terminals pozidriv No 2

Mounting Support

PlateRail

Standards

CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508

Product Certifications

ULDNVCCCCSAGOSTLROS (Lloyds register of shipping)RINAGLBVUKCA

IP degree of protection

IP20 front face IEC 60529

Protective treatment

THIEC 60068-2-30

Climatic withstand

IACS E10 exposure to damp heat IEC 60947-1 Annex Q category D exposure to damp heat

Permissible ambient air temperature around the device

-40...140 °F (-40...60 °C)140...158 °F (60...70 °C) with derating

Operating altitude

0...9842.52 ft (0...3000 m)

Fire resistance

1562 °F (850 °C) IEC 60695-2-1

Flame retardance

V1 conforming to UL 94

Mechanical robustness

Vibrations contactor open 2 Gn, 5...300 Hz) Vibrations contactor closed 4 Gn, 5...300 Hz) Shocks contactor closed 15 Gn for 11 ms) Shocks contactor open 6 Gn for 11 ms)

Height

6.2 in (158 mm)

Width

5.9 in (150 mm)

Depth

5.2 in (132 mm)

Net Weight

6.31 lb(US) (2.86 kg)