22 W at full load and at end of starting268 W in transient state
Assembly style
With heat sink
Function Available
Integrated bypass
Supply voltage limits
195...759 V
Supply frequency
50...60 Hz - 5...5 %
Network Frequency
47.5...63 Hz
Output voltage
<= power supply voltage
[Uc] control circuit voltage
110 V AC +/- 10 %
Starting time
1 s / 36012 s / 30Adjustable from 1 to 25 s
Deceleration time symb
Adjustable from 1 to 25 s
Starting torque
30...80 % of starting torque of motor connected directly on the line supply
Discrete input type
Internal LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA
Discrete input voltage
24 V
Discrete input logic
Positive logic LI1, LI2, BOOST <= 3 V >= 10 V
Discrete output current
2 A DC-133 A AC-15
Discrete output type
Relay outputs R1A, R1C
Discrete output voltage
24 V DCrelay outputs250 V ACrelay outputs
Minimum switching current
10 mA 17 V DC relay outputs
Display type
1 LED Green)starter powered up1 LED Yellow)nominal voltage reached
Tightening torque
6.2 lbf.in (0.7 N.m)44.3 lbf.in (5 N.m)
Electrical connection
Earth connection: tinned connector fixed using à 6 mm screws4 mm screw clamp terminal - rigid with cable end 1 6...35 mm² power circuitScrew connector - rigid with cable end 1 0.75...1.5 mm² control circuit4 mm screw clamp terminal - rigid without cable end 2 6...25 mm² power circuitScrew connector - rigid without cable end 2 0.75...1.5 mm² control circuit4 mm screw clamp terminal - flexible with cable end 1 4...25 mm² power circuitScrew connector - flexible with cable end 1 0.75...1.5 mm² control circuit4 mm screw clamp terminal - flexible without cable end 1 6...25 mm² power circuitScrew connector - flexible without cable end 1 0.75...1.5 mm² control circuit4 mm screw clamp terminal - flexible with cable end 2 4...16 mm² power circuitScrew connector - flexible with cable end 2 0.75...1.5 mm² control circuit4 mm screw clamp terminal - flexible without cable end 2 6...25 mm² power circuitScrew connector - flexible without cable end 2 0.75...1.5 mm² control circuit
marking
CE
Operating position
Vertical +/- 10 degree
Height
5.7 in (146 mm)
Width
7.09 in (180 mm)
Depth
5.0 in (126 mm)
Net Weight
5.3 lb(US) (2.4 kg)
Compatibility code
ATS01N2
Electromagnetic compatibility
Conducted and radiated emissions level B IEC 60947-4-2Damped oscillating waves level 3 IEC 61000-4-12Electrostatic discharge level 3 IEC 61000-4-2EMC immunity level 3 EN 50082-1EMC immunity level 3 EN 50082-2Harmonics level 3 IEC 1000-3-2Harmonics IEC 1000-3-4Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6Immunity to electrical transients level 4 IEC 61000-4-4Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3Micro-cuts and voltage fluctuation level 3 IEC 61000-4-11Voltage/current impulse level 3 IEC 61000-4-5
Standards
EN/IEC 60947-4-2
Product Certifications
GOSTULC-tickCCCCSA
IP Degree of Protection
On front panel IP20
Pollution degree
3 IEC 60664-13 UL 508
Vibration resistance
2 gn
Shock resistance
8 gn 11 ms EN/IEC 60068-2-27
Relative humidity
5...95 % without condensation or dripping water EN/IEC 60068-2-3
Ambient air temperature for storage
-13...158 °F (-25...70 °C) EN/IEC 60947-4-2
Operating altitude
<= 6561.68 ft (2000 m) without derating> 6561.68 ft (2000 m) with current derating of 0.5 % per additional 100 m
ATS01N244LY Soft Starter for Asynchronous Motor | Schneider Electric | INDSLT
