The ATS01N212RT is a DIN rail-mounted soft starter designed for 3-phase asynchronous motors, capable of handling up to 12A and 3kW or 3hp at 200V to 240V AC.
Product ModelATS01N212RT
Product ID30784
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureEfficient motor start-up with voltage ramp start
2
FeatureIntegrated bypass for reliable operation
3
FeatureDIN rail mounting for easy installation
4
FeatureCertified to various international standards (ASME A17.5, B44.1-96, C-tick, CCC, CSA, EN/IEC 60947-4-2, GOST, UL Listed)
5
FeatureIdeal for applications requiring smooth and controlled motor start-ups
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Range of Product
Altistart 01
Product or Component Type
Soft starter
Product destination
Asynchronous motors
Product Specific Application
Simple machine
Device short name
ATS01
Phase
3 phase
[Us] rated supply voltage
460...480 V - 10...10 %
Maximum Horse Power Rating
7.5 hp, 3 phase 460...480 V
IcL starter rating
12 A
Utilisation category
AC-53B EN/IEC 60947-4-2
Current consumption
60 A at nominal load
Type of start
Start with voltage ramp
Power dissipation in W
4 W at full load and at end of starting124 W in transient state
Assembly style
With heat sink
Function Available
Integrated bypass
Supply voltage limits
414...528 V
Supply frequency
50...60 Hz - 5...5 %
Network Frequency
47.5...63 Hz
Output voltage
<= power supply voltage
[Uc] control circuit voltage
Built into the starter
Starting time
Adjustable from 1 to 10 s
Deceleration time symb
Adjustable from 1 to 10 s
Starting torque
30...80 % of starting torque of motor connected directly on the line supply
Discrete input type
Logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Discrete input voltage
24...40 V
Discrete input logic
Positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
Discrete output current
2 A DC-133 A AC-15
Discrete output type
Open collector logic LO1 end of starting signalRelay outputs R1A, R1C NO
Discrete output voltage
24 V 6...30 V) open collector logic
Minimum switching current
10 mA 6 V DC relay outputs
Maximum switching current
Relay outputs 2 A 250 V AC cos phi = 0.5 20 ms inductiveRelay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive
Display type
1 LED Green)starter powered up1 LED Yellow)nominal voltage reached
4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuitScrew connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuitScrew connector - rigid 2 0.5...1 mm² AWG 17 control circuitScrew connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuitScrew connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuitScrew connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
marking
CE
Operating position
Vertical +/- 10 degree
Height
4.9 in (124 mm)
Width
1.8 in (45 mm)
Depth
5.2 in (131 mm)
Net Weight
0.93 lb(US) (0.42 kg)
compatibility code
ATS01N2
Electromagnetic compatibility
Conducted and radiated emissions level B CISPR 11Conducted and radiated emissions level B IEC 60947-4-2Damped oscillating waves level 3 IEC 61000-4-12Electrostatic discharge level 3 IEC 61000-4-2EMC immunity level 3 EN 50082-1EMC immunity level B EN 50082-2Harmonics level 3 IEC 1000-3-2Harmonics level 3 IEC 1000-3-4Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6Immunity to electrical transients level 4 IEC 61000-4-4Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3Micro-cuts and voltage fluctuation IEC 61000-4-11Voltage/current impulse level 3 IEC 61000-4-5
Standards
EN/IEC 60947-4-2
Product Certifications
ULCSACCCC-tickGOST
IP Degree of Protection
IP20
Pollution degree
2 EN/IEC 60947-4-2
Vibration resistance
1 gn 13...150 Hz)EN/IEC 60068-2-61.5 mm peak to peak 3...13 Hz)EN/IEC 60068-2-6
Shock resistance
15 gn 11 ms EN/IEC 60068-2-27
Relative humidity
5...95 % without condensation or dripping water EN/IEC 60068-2-3
Ambient air temperature for operation
14...104 °F (-10...40 °C) without derating)104...122 °F (40...50 °C) with current derating of 2 % per °C)
Ambient air temperature for storage
-13...158 °F (-25...70 °C) EN/IEC 60947-4-2
Operating altitude
<= 3280.84 ft (1000 m) without derating> 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
