The BMXMSP0200 PTO Module is a 2-channel, 4-input motion control module designed for precision and reliability in automation systems.
Product ModelBMXMSP0200
Product ID30104
Stock on Request
Last updated: 8/29/2026
Key Features
1
Feature2-channel motion control for precise automation
2
Feature4-input configuration for versatile applications
3
Feature24V DC power supply for reliable operation
4
FeatureIP 20 protection for robust electronics
5
FeatureStandard format (1 slot) for easy integration
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Range of Product
Modicon X80
Product or Component Type
PTO module
Number of Channels
2
Number of inputs
4
Discrete input type
Current sink yes origin input IEC 61131-2 type 3Current sink yes proximity input and limit switch input IEC 61131-2 type 3Current sink or source counter in position input IEC 61131-2 type 3Current sink or source drive ready, emergency input IEC 61131-2 type 3
Input compatibility
2-wire/3-wire proximity sensor 19.2...30 V IEC 947-5-2
Output compatibility
Signal converter (USIC)RS422, 7 mA inputSource input, 5 V to 24 V
Output frequency
200 kHz <1.6 ft (0.5 m) with USIC and VW3M8210R05100 kHz <16.4 ft (5 m) with the normal source input circuit200 kHz <32.8 ft (10 m) with the RS422 compatible circuits
Operating threshold
> 12 V no error supply voltage> 8 V error supply voltage
Input voltage
24 V DC
Input current
4.3 mA
Voltage state 1 guaranteed
>= 11 V
Current consumption
35 mA 24 V DC preactuator150 mA 3.3 V DC typical200 mA 3.3 V DC maximum
Current state 1 guaranteed
>= 2 mA
Voltage state 0 guaranteed
5 V
Current state 0 guaranteed
<= 1.5 mA
Response time
< 200 µs for position completed input and drive ready input< 60 µs for origin input and proximity input
Number of outputs
1 pulse output2 auxiliary output
Preactuator voltage detection threshold
< 8 V error preactuator voltage auxiliary output< 8 V no error preactuator voltage auxiliary output> 14 V error preactuator voltage pulse output> 14 V no error preactuator voltage pulse output
Output voltage
24 V DC
Output voltage limits
19...30 V
Discrete output current
50 mA
Current per channel
0.4 A
Maximum leakage current
0.05 mA at state 0
[Ures] residual voltage
0.15 V at state 1
Response time on output
1.2...1.5 ms on appearance1.2...1.5 ms on disappearance
Load impedance ohmic
15000 Ohm
Output overload protection
By current limiter and electronic circuit breaker
Output short-circuit protection
By current limiter and electronic circuit breaker
Reverse polarity protection
By reverse mounting diode on outputIntegrated on input
Insulation between channels
No insulated
Insul btwn prim and second
1500 Vrms
Insulation resistance
> 10 MOhm
Local signalling
for module operating (RUN) 1 LED (green) for external fault (I/O) 1 LED (red) for internal fault, module failure (ERR) 1 LED (red) for download (DL) 1 LED (green) for channel status (CH00) 8 LEDs (green) for channel status (CH01) 8 LEDs (green)
Electrical connection
2 connectors 28 pins
Module format
Standard
Product certifications
CEULCSARCMEACMerchant NavyATEX zone 2/22IECEx zone 2/22
EN/IEC 61131-2EN/IEC 61010-2-201UL 61010-2-201CSA C22.2 No 61010-2-201IACS E10EN/IEC 61000-6-5, interface type 1 and type 2EN/IEC 61850-3, location GEN/IEC 60079-0
