ATV930D55N4Z

3 phase

EtherNet/IPModbus TCPModbus serial

55.0 kW normal duty45.0 kW heavy duty

IntegratedWith EMC plate option

Slot A communication module Profibus DP V1Slot A communication module PROFINETSlot A communication module DeviceNetSlot A communication module EtherCATSlot A communication module CANopen daisy chain RJ45Slot A communication module CANopen SUB-D 9Slot A communication module CANopen screw terminalsSlot A/slot B/slot C digital and analog I/O extension moduleSlot A/slot B/slot C output relay extension moduleSlot B 5/12 V digital encoder interface moduleSlot B analog encoder interface moduleSlot B resolver encoder interface module communication module Ethernet Powerlink

Constant torque standardOptimized torque modeVariable torque standard

599 Hz

2.5 kHz

70 kVA 480 V normal duty)59.7 kVA 480 V heavy duty)

50-60 Hz

10

2

3

2

3

Relay output R1 resistive, cos phi = 1 3 A 250 V ACRelay output R1 resistive, cos phi = 1 3 A 30 V DCRelay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V ACRelay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DCRelay output R2, R3 resistive, cos phi = 1 5 A 250 V ACRelay output R2, R3 resistive, cos phi = 1 5 A 30 V DCRelay output R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V ACRelay output R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC

Ethernet2-wire RS 485

Slave Modbus TCP

RTU

8 bits, configurable odd, even or no parity Modbus serial

True

Automatic whatever the loadNot available in permanent magnet motor lawCan be suppressedAdjustable

True

480.0 V

88.0 A

Natural convection 131 W 380 V 2.5 kHzForced convection 917 W 380 V 2.5 kHz

True

False

False

False

False

Thermal protection motorSafe torque off motorMotor phase break motorThermal protection driveSafe torque off driveOverheating driveOvercurrent between output phases and earth driveOverload of output voltage driveShort-circuit protection driveMotor phase break driveOvervoltages on the DC bus driveLine supply overvoltage driveLine supply undervoltage driveLine supply phase loss driveOverspeed driveBreak on the control circuit drive

10.4 in (265 mm)

12.09 in (307 mm)

Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16Line side screw terminal 70...120 mm² AWG 1/0...250 kcmilMotor screw terminal 70...120 mm² AWG 1/0...250 kcmilDC bus screw terminal 70...120 mm² AWG 1/0...250 kcmil

External supply for digital inputs 24 V DC 19...30 V), <1.25 mA overload and short-circuit protectionInternal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protectionInternal supply for digital inputs and STO 24 V DC 21...27 V), <200 mA overload and short-circuit protection

DI1...DI8 discrete input level 1 PLC IEC 61131-2DI7, DI8 pulse input level 1 PLC IEC 65A-68STOA, STOB discrete input level 1 PLC IEC 61131-2

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

Relay output R1, R2, R3)5 ms +/- 0.5 ms)

<= 3280.84 ft (1000 m) without derating1000...4800 m with current derating 1 % per 100 m

CSAULTÜV

UL 508CIEC 61800-3IEC 61800-5-1IEC 61000-3-12IEC 60721-3IEC 61508IEC 13849-1

With heat sink

Class 3C3 according to IEC 60721-3-3Class 3S3 according to IEC 60721-3-3

10 m/s² at 13...200 Hz

Class 3K5 according to EN 60721-3

III

> 1 MOhm 500 V DC for 1 minute to earth

1.5 mm peak to peak 2...13 Hz)IEC 60068-2-61 gn 13...200 Hz)IEC 60068-2-6

Chemical pollution resistance class 3C3 IEC 60721-3-3Dust pollution resistance class 3S3 IEC 60721-3-3

5...122 °F (-15...50 °C) without derating)122...140 °F (50...60 °C) with derating factor)