ATV650U30N4EU

Name: ATV650U30N4EU
Brand: Schneider
SKU: ATV650U30N4EU

The ATV650U30N4EU is a high-performance variable speed drive designed for industrial applications, offering reliability and efficiency.

Product ModelATV650U30N4EU

Product ID29338

Stock on Request

Last updated: 8/29/2026

Quantity

Key Features

1
FeatureHigh-performance variable speed drive for industrial applications.
2
FeatureReliable and efficient operation in a wide range of frequencies.
3
FeatureSuitable for synchronous reluctance and permanent magnet motors.
4
FeatureFeatures safe torque off (STO) for enhanced safety.
5
FeatureCompact design with IP55 protection for harsh environments.

Technical Specifications

Detailed engineering parameters based on manufacturer documentation

Specifications may be subject to change without notice

Parameter

Value

Parameter

Value

Range of Product

Altivar Process ATV600

Product or Component Type

Variable speed drive

Product Specific Application

Process and utilities

Device short name

ATV650

Variant

With disconnect switch

Product destination

Asynchronous motorsSynchronous motors

EMC filter

Integrated 164.04 ft (50 m) IEC 61800-3 category C2Integrated 492.1 ft (150 m) IEC 61800-3 category C3

IP degree of protection

IP55IEC 60529IP55IEC 61800-5-1

[Us] rated supply voltage

380...480 V - 15...10 %

Degree of protection

UL type 12 UL 508C

Type of cooling

Forced convection

Supply frequency

50...60 Hz - 5...5 %

Motor power kW

2.2 kW heavy duty)3 kW normal duty)

Maximum Horse Power Rating

4 hp normal duty3 hp heavy duty

Line current

5.1 A 480 V normal duty)4.5 A 380 V heavy duty)4 A 480 V heavy duty)5.8 A 380 V normal duty)

Prospective line Isc

50 kA

Apparent power

3.3 kVA 480 V heavy duty)4.2 kVA 480 V normal duty)

Continuous output current

5.6 A 4 kHz heavy duty7.2 A 4 kHz normal duty

Asynchronous motor control profile

Optimized torque modeConstant torque standardOptimized torque mode

Synchronous motor control profile

Synchronous reluctance motorPermanent magnet motor

Speed drive output frequency

0.1...500 Hz

Nominal switching frequency

4 kHz

Switching frequency

4...12 kHz with derating factor2...12 kHz adjustable

Safety function

STO (safe torque off) SIL 3

Discrete input logic

Positive logic (source) DI1...DI8), < 5 V, > 11 VNegative logic (sink) DI1...DI8), > 16 V, < 10 V

communication port protocol

Modbus TCPEthernetEthernet

Option card

Slot A communication module, PROFINETSlot A communication module, DeviceNetSlot A communication module, Modbus TCP/EtherNet/IPSlot A communication module, CANopen daisy chain RJ45Slot A communication module, CANopen SUB-D 9Slot A communication module, CANopen screw terminalsSlot A/slot B digital and analog I/O extension moduleSlot A/slot B output relay extension moduleSlot A communication module, Ethernet IP/Modbus TCP/MD-Link communication module, BACnet MS/TP communication module, Ethernet PowerlinkSlot A communication module, Profibus DP V1

Mounting Mode

Wall mount

Maximum transient current

7.9 A 60 s normal duty)8.4 A 60 s heavy duty)

Phase

3 phase

Discrete output number

Discrete output type

Relay outputs R1A, R1B, R1C 250 V AC 3000 mARelay outputs R1A, R1B, R1C 30 V DC 3000 mARelay outputs R2A, R2C 250 V AC 5000 mARelay outputs R2A, R2C 30 V DC 5000 mARelay outputs R3A, R3C 250 V AC 5000 mARelay outputs R3A, R3C 30 V DC 5000 mA

Output voltage

<= power supply voltage

Permissible temporary current boost

1.5 x In 60 s heavy duty)1.1 x In 60 s normal duty)

Motor slip compensation

AdjustableNot available in permanent magnet motor lawCan be suppressedCan be suppressed

Acceleration and deceleration ramps

Linear adjustable separately from 0.01...9999 s

Physical interface

Ethernet2-wire RS 485

Braking to standstill

By DC injection

Protection type

Safe torque off motorMotor phase break motorThermal protection driveSafe torque off driveOverheating driveOvercurrent between output phases and earth driveOverload of output voltage driveShort-circuit protection driveMotor phase break driveOvervoltages on the DC bus driveLine supply overvoltage driveLine supply undervoltage driveLine supply phase loss driveOverspeed driveBreak on the control circuit driveThermal protection motor

Transmission Rate

10, 100 Mbits4800 bps, 9600 bps, 19200 bps, 38.4 Kbps

Frequency resolution

Analog input 0.012/50 HzDisplay unit 0.1 Hz

Transmission frame

RTU

Electrical connection

Line side screw terminal 4...6 mmÂ²Motor screw terminal 4...6 mmÂ²Control removable screw terminals 0.5...1.5 mmÂ²

Connector type

RJ45 on the remote graphic terminal)Modbus serialRJ45 on the remote graphic terminal)Ethernet/Modbus TCP

Data format

8 bits, configurable odd, even or no parity

Type of polarization

No impedance

Exchange mode

Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

Number of addresses

1...247 Modbus serial

Method of access

Slave Modbus TCP

Supply

Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protectionInternal supply for digital inputs and STO 24 V DC 21...27 V), <200 mA overload and short-circuit protectionExternal supply for digital inputs 24 V DC 19...30 V), <1.25 mA overload and short-circuit protection

Local signalling

for embedded communication status 3 LEDs (dual colour) for communication module status 4 LEDs (dual colour) for presence of voltage 1 LED (red) for local diagnostic 3 LEDs

Width

10.4 in (264 mm)

Height

26.7 in (678 mm)

Depth

11.8 in (300 mm)

Net Weight

23.4 lb(US) (10.6 kg)

Analogue input number

Analogue input type

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bitsAI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bitsAI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits

Discrete input number

Discrete input type

DI7, DI8 programmable as pulse input 0...30 kHz, 24 V DC <= 30 V)

Input compatibility

DI5, DI6 discrete input level 1 PLC IEC 65A-68STOA, STOB discrete input level 1 PLC IEC 61131-2DI1...DI6 discrete input level 1 PLC IEC 61131-2

Analogue output number

Analogue output type

Software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bitsSoftware-configurable current AQ1, AQ2 0...20 mA 10 bitsSoftware-configurable current DQ-, DQ+ 30 V DCSoftware-configurable current DQ-, DQ+ 100 mA

Sampling duration

5 ms +/- 1 ms DI5, DI6) - discrete input5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input10 ms +/- 1 ms AO1) - analog output2 ms +/- 0.5 ms DI1...DI4) - discrete input

Accuracy

+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input

Linearity error

AO1, AO2 +/- 0.2 % analog outputAI1, AI2, AI3 +/- 0.15 % of maximum value analog input

Relay output number

Relay output type

Configurable relay logic R2 sequence relay NO 100000 cyclesConfigurable relay logic R3 sequence relay NO 100000 cyclesConfigurable relay logic R1 fault relay NO/NC 100000 cycles

Refresh time

Relay output R1, R2, R3)5 ms +/- 0.5 ms)

Minimum switching current

Relay output R1, R2, R3 5 mA 24 V DC

Maximum switching current

Relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DCRelay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V ACRelay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DCRelay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC

Isolation

Between power and control terminals

Maximum output frequency

500 kHz

Maximum Input Current per Phase

5.8 A

Quantity per Set

enclosure mounting

Wall mounted

Insulation resistance

> 1 MOhm 500 V DC for 1 minute to earth

Noise level

52 dB

Operating position

Vertical +/- 10 degree

Maximum THDI

<48 % full load IEC 61000-3-12

Electromagnetic compatibility

Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3Electrical fast transient/burst immunity test level 4 IEC 61000-4-41.2/50 Âµs - 8/20 Âµs surge immunity test level 3 IEC 61000-4-5Conducted radio-frequency immunity test level 3 IEC 61000-4-6Electrostatic discharge immunity test level 3 IEC 61000-4-2

Pollution degree

Vibration resistance

1 gn 13...200 Hz)IEC 60068-2-61.5 mm peak to peak 2...13 Hz)IEC 60068-2-6

Shock resistance

15 gn 11 ms IEC 60068-2-27

Relative humidity

5...95 % without condensation IEC 60068-2-3

Ambient air temperature for operation

104...122 °F (40...50 °C) with derating factor)5...104 °F (-15...40 °C) without derating)

Ambient Air Temperature for Storage

-40...158 °F (-40...70 °C)

Operating altitude

1000...4800 m with current derating 1 % per 100 m<= 3280.84 ft (1000 m) without derating

Product Certifications

TÃVATEX INERISULDNV-GLCSABureau Veritas

marking

Standards

IEC 61800-3 environment 1 category C2EN/IEC 61800-3 environment 2 category C3IEC 61800-5-1IEC 61000-3-12IEC 60721-3IEC 61508IEC 13849-1IEC 61800-3

Overvoltage category

III

Regulation loop

Adjustable PID regulator