ATV630U22Y6

IP00IEC 61800-5-1IP00IEC 60529IP20 with kit VW3A9705)IEC 61800-5-1IP20 with kit VW3A9705)IEC 60529

Forced convection

1.5 kW 500 V normal duty)1.1 kW 500 V heavy duty)2.2 kW 690 V normal duty)1.5 kW 690 V heavy duty)

3.4 A 500 V normal duty)3.6 A 690 V normal duty)2.6 A 500 V heavy duty)2.6 A 690 V heavy duty)

4.3 kVA 690 V normal duty)3.1 kVA 690 V heavy duty)

Optimized torque modeVariable torque standardConstant torque standard

0.1...500 Hz

2...8 kHz adjustable4...8 kHz with derating factor

Positive logic (source) DI1...DI8), < 5 V, > 11 VNegative logic (sink) DI1...DI8), > 16 V, < 10 V

Slot A communication module, Profibus DP V1Slot A communication module, PROFINETSlot A communication module, DeviceNetSlot A communication module, Modbus TCP/EtherNet/IPSlot A communication module, CANopen daisy chain RJ45Slot A communication module, CANopen SUB-D 9Slot A communication module, CANopen screw terminalsSlot A/slot B digital and analog I/O extension moduleSlot A/slot B output relay extension moduleSlot A communication module, Ethernet IP/Modbus TCP/MD-Link communication module, BACnet MS/TP communication module, Ethernet Powerlink

3.4 A 60 s normal duty)3.6 A 60 s heavy duty)

0

<= power supply voltage

AdjustableAutomatic whatever the loadNot available in permanent magnet motor lawCan be suppressed

Ethernet2-wire RS 485

Thermal protection motorSafe torque off motorMotor phase break motorThermal protection driveSafe torque off driveOverheating driveOvercurrent between output phases and earth driveOverload of output voltage driveShort-circuit protection driveMotor phase break driveOvervoltages on the DC bus driveLine supply overvoltage driveLine supply undervoltage driveLine supply phase loss driveOverspeed driveBreak on the control circuit drive

Display unit 0.1 HzAnalog input 0.012/50 Hz

Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16Motor screw terminal 4...10 mm² AWG 12...AWG 8Line side screw terminal 4...10 mm² AWG 12...AWG 8

8 bits, configurable odd, even or no parity

Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

Slave Modbus TCP

for local diagnostic 3 LEDs for embedded communication status 3 LEDs (dual colour) for communication module status 4 LEDs (dual colour) for presence of voltage 1 LED (red)

16.5 in (420 mm)

48.5 lb(US) (22 kg)

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bitsAI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bitsAI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits

DI7, DI8 programmable as pulse input 0...30 kHz, 24 V DC <= 30 V)

2

2 ms +/- 0.5 ms DI1...DI4) - discrete input5 ms +/- 1 ms DI5, DI6) - discrete input5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input10 ms +/- 1 ms AO1) - analog output

AI1, AI2, AI3 +/- 0.15 % of maximum value analog inputAO1, AO2 +/- 0.2 % analog output

Configurable relay logic R1 fault relay NO/NC 100000 cyclesConfigurable relay logic R2 sequence relay NO 100000 cyclesConfigurable relay logic R3 sequence relay NO 100000 cycles

Relay output R1, R2, R3 5 mA 24 V DC

Between power and control terminals

3.6 A

Wall mounted

58 dB

87178.3 Gal/hr(US) (330 m3/h)

<48 % with external line choke IEC 61000-3-12

2

15 gn 11 ms IEC 60068-2-27

5...122 °F (-15...50 °C) without derating)122...140 °F (50...60 °C) with derating factor)

<= 3280.84 ft (1000 m) without derating1000...4800 m with current derating 1 % per 100 m

CE

III