Schneider Electric ZBRRH Wireless Receiver, part of the Harmony XB5R series, features 2 push buttons and 6 LEDs for wireless communication.
Product ModelZBRRH
Product ID28286
Stock on Request
Last updated: 8/29/2026
Key Features
1
FeatureWireless Communication
2
FeatureUser-Friendly Interface
3
FeatureReliable Performance
4
FeatureVersatile Applications
5
FeatureEfficient Power Management
6
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
Specifications may be subject to change without notice
Parameter
Value
Parameter
Value
Range of Product
Harmony
Product or Component Type
Wireless receiver
Device short name
ZBRRH
Product Specific Application
Interface to Harmony hub
Function of module
Bi-stable
Reset time
2 ms time delay
FeatureWireless Communication
7
FeatureUser-Friendly Interface
8
FeatureReliable Performance
9
FeatureVersatile Applications
10
FeatureEfficient Power Management
Transmission frequency
2405 MHz
emission class
5M00G7W
Antenna type
Omnidirectional
Output Type
Transistor PNP
Output contacts
4 PNP
Time delay range
0.5 s - 15...15 %)
Maximum switching current
0.2 mA DC
Minimum switching current
10 mA 5 V DC
[Us] Rated Supply Voltage
24 V DC - 15...20 %
Maximum voltage drop
<2 V DC 2 A
Communication port protocol
Zigbee green power 2.4 GHz IEEE 802.15.4
Maximum sensing distance
328.08 ft (100 m) in free field82.02 ft (25 m) transmitter in a plastic box type XAL D and receiver in a metal enclosure131.2 ft (40 m) transmitter in box type XAL D, receiver in metal enclosure and use relay-antenna
Response Time
< 30 ms after transmitter clicks
Channels utilisation
1 Harmony Hub per receiver
Utilisation category
DC-13 EN/IEC 60947-5-1
Maximum power consumption in VA
20 VA DC
Maximum power consumption in W
20 W DC
Breaking capacity
4.8 W per output)
Short-circuit protection
0.4 A fuse fast blow
Operating position
Any position without derating
Electrical connection
1 conductor cable 0.0002...0.004 in² (0.14...2.5 mm²) - AWG 26...AWG 14 - solid - without cable end IEC 60947-12 conductors cable 0.0002...0.002 in² (0.14...1.5 mm²) - AWG 26...AWG 16 - solid - without cable end IEC 60947-11 conductor cable 0.0002...0.006 in² (0.14...4 mm²) - AWG 26...AWG 12 - flexible - with cable end IEC 60947-12 conductors cable 0.0002...0.002 in² (0.14...1.5 mm²) - AWG 26...AWG 16 - flexible - with cable end IEC 60947-1
Tightening torque
4.4...8.9 lbf.in (0.5...1 N.m) EN/IEC 60947-1
Housing material
Self-extinguishing plastic
Status LED
1 LED Green power ON1 LED green and yellow reception signal4 LEDs Green relay ON
Mounting support
35 mm symmetrical DIN rail conforming to EN/IEC 60715Mounting plate
Rated short-duration power frequency withstand voltage
90 % -4...131 °F (-20...55 °C), without condensation ETSI EN 300 440-1
Vibration resistance
+/- 7.5 mm 5...14 Hz)IEC 60068-2-62 gn 8...150 Hz)IEC 60068-2-6
Shock resistance
10 gn 16 ms) 6000 shocks IEC 60068-2-27
IP degree of protection
IP20 IEC 60529 casing)IP20 terminals)
Pollution degree
2 IEC 60664-1
Overvoltage category
III IEC 60664-1
Insulation resistance
> 500 MOhm 500 V DC NF C 20-030
[Ui] rated insulation voltage
60 V IEC 60664-1
Electromagnetic compatibility
Immunity for industrial environments conforming to EN/IEC 61000-6-2Conducted and radiated emissions class B conforming to CISPR 22Electrostatic discharge immunity test - test level: 8 kV (in free air (in insulating parts)) conforming to IEC 61000-4-2Electrostatic discharge immunity test - test level: 6 kV (on contact (on metal parts)) conforming to IEC 61000-4-2Susceptibility to electromagnetic fields - test level: 10 V/m (80...2000 MHz) conforming to IEC 61000-4-3Susceptibility to electromagnetic fields - test level: 3 V/m (80...2700 MHz, distance = 20 m) conforming to IEC 61000-4-3Electrical fast transient/burst immunity test - test level: 2 kV (power supply wires) conforming to IEC 61000-4-4Conducted RF disturbances - test level: 10 V conforming to IEC 61000-4-6Radiated emission conforming to ETSI EN 300 440-1Conducted emission conforming to EN 300-489-1Conducted emission conforming to ETSI EN 300 489-3Radiated emission conforming to ETSI EN 300 440-2Electrical fast transient/burst immunity test - test level: 1 kV (PNP output wires) conforming to IEC 61000-4-41.2/50 µs shock waves immunity test - test level: 0.5 kV (differential mode) conforming to IEC 61000-4-51.2/50 µs shock waves immunity test - test level: 1 kV (common mode) conforming to IEC 61000-4-5Immunity to microbreaks and voltage drops - test level: 7 ms conforming to IEC 61000-4-11
Schneider Electric ZBRRH Wireless Receiver - Harmony XB5R | INDPRT
